Interested to Buy Any Domain ? << Click Here >> for more details...
What is RTCC in a transfomer and specify its function.
- 11 Answers
- 114465 Views
- MCB, Vodafone, I also Faced
- E-Mail Answers
Answer Posted / praveen
RTCC is Remote tap changer circuit, normaly RTCC panel will
be installed in Main panel room and will be connected to
OLTC ( On line tap changer) of the transformer through
control cable.There will be AVR in RTCC Panel to control
the secondary voltage of the transformer and AVR output
will control OLTC motor in Clock wise or Anty clock wise.
and also there will be selection in RTCC panel for Auto and
manual operation.
| Is This Answer Correct ? | 32 Yes | 7 No |
Post New Answer View All Answers
In a power conditoining unit (inverter) of a solar plant when we measure the d.c. current fed by different strings of solar plates to inverter, the current in the negative wire is less almost by 1 ampere to the current in its positive wire say current in positive wire 5 A , then current in negative wire of the same string is 4 A. Since the current entering should be equal to current leaving then why the current is noticably less in negative wire.
In 90 kva alternator that produce the output voltage is 115(p-n),200(p-p) at 1500 rpms means what ampere it produced ?
If we have to feed a housing complex having load 8MVA, than what would be the better option, either we first step down 33kv supply into 11kv & than 430v or we proposed no of 33/.44 kv transformer, also which option is economical?
I have 4 DG set with 1500KVA rating. system breakers are 11KV & alternator are 415 Volts. Between alternator & breaker one stepup transformer used. i want to Know what is max. resistance for body earthing & 415 & 11KV V Neuteal earthing. my fault current is 14 times for 2 sec.
for 11KV OH system what will be typical per KM "R" "L" "C" parameter. for 33KV OH system what will be typical per KM "R" "L" "C" parameter. for 33KV UG system what will be typical per KM "R" "L" "C" parameter.
Why a Permanent Magnet Generator has higher frequency as compared to frequency of main alternator?
can anyone send me some sample question regarding power grid corp
I have a situation to design sub-Distribution board/Panel meant for feeding power sockets. In the incomer CAN i Take TP MCCB with Neutral Link and All the outgoing feeders with to sockets with TP MCCB and Neutral Link? P.S : My System is IT Earthing
what is the clear formula to calculate cable size for a load
This is reqd for a 1MW Solar power plant..We have 2DC outputs from the solar panels Connected to 2INVERTOR panels.. Output from invertor is 3ph,280v,500kva,50hz.These are connected to individual ACB.This has to be stepped up to 11KV ,1250KVA SYSTEM.Now can I use (1) one more ACBTO GIVE A COMBINED OUTPUT OF 1000KVA,280V & STEP UP THE OUTPUT BY USING a single two winding 3 ph transformer 11kv/1250kva. or (2)use the two outputs and connect to one three winding transformer of above rating..Pls suggestwith details.
what is the working principle of a DG Set, Alternator, & exiter
we use 400/5A ct and 35/roor3KV,/0.1/root3KV,0.1/root3KV pt ratio. What is the multiple factor of this meter.
Thermal withstand capability under full short circuit conditions, in terms of number of times of occurrence of short circuit and corresponding anticipated percentage reduction in transformer life.
what is diff btw electric,magnetic & eletromagnetic field
which pump used in WTP explain the function of VFD how to dtermine capacitorbank of capacity one plant
