MCB is used for high rating &MCB is used for lower
rating.What is technical difference between ACB & MCB?
- 7 Answers
- 10305 Views
- I also Faced
- E-Mail Answers
Answer Posted / c.r.shreedhar
MCB can carry small currents up to 100A and it is having
only thermal trip protection and breaking capacity of MCB's
are very less the maximum is 10KA, but ACB's can carry
large currents up to 6300A,breaking capacity of ACB's are
high the maximum is 120KA and it is having lot of
protections like under voltahe over voltage short circuit
and earth fault protections, user can adjest the protection
settings, most advanced feature of ACB's are communication
facility, user can monitor and set the parametrs from
remote and also he can download the history of faults with
day and time stamp. So, where ever ever user required high
grade of protection the only choice is ACB's.
| Is This Answer Correct ? | 13 Yes | 0 No |
Post New Answer View All Answers
Why 3 phase induction motor getting supply in body if one of it's phase is cut
What are the components of feedback control system?
How can calculate the earthing strip of Copper/GI for rating of 30kV,discharge current 10KA Lightning arrester.
How To Convert Apparent Into Real Power Without Knowing Reactive Power?
Details about Flux Compensated magnetic Amplifer starter for motors
how define the torque in ac drive. from electrical side in the drive friquency ,voltage and current three factor is there.
What is the difference between acs 550 & acs 850
why do we have spikes enough to burn electronic boards, when generators are not grounded
Why to keep capacitor bank off while generator running.
Which standard we are following earthing resistance test
During Starter Panel Com missing I Found The Main Incomer 40Amp MCB 10KA Trip When Motor Change Star To Delta Motor Rating 20HP BUT When We Use Same MCB To Other Motor It Does Not trip Or What Is Necessaries for Star Delta Starter MCB SFU MPCB OR MCCB And What are The Breaking Capacity of MCCB in the Motor above 15HP
What are the three constants associated with a steady state error?
how balanced in star delta connection ?
What are the criteria shall be considers for sizing Fuse and MCB? If the rated current is 10Amps what should be the fuse size / MCB Size?
On Which Pressure PRV is operated.
