how we can convert 3 phase to single phase without using any transformer
- 8 Answers
- 10706 Views
- I also Faced
- E-Mail Answers
Answer Posted / dinesh kumar
using a rectifier, conovert the 3 phase into DC and then
invert it to get a single phase
Is this correct?
| Is This Answer Correct ? | 14 Yes | 6 No |
Post New Answer View All Answers
how we can explain arc heatng?
what r the safety measures in UPS ? explain all?
A commercial Building is designed with 14th floor levels with indoor substation of three phase transformer with rated capacity of 1000 Kva.The transformer delivered 65% of its rated capacity at 0.67 power factor lagging.Because of low power factor, the power customer was penalized and certain cost was charged accordingly based on every point percentage lower than 85%.This situation may repeatedly happen on the succeding energy bills of power customer.The power customer is desired to improve its historical power factor of 0.67 lagging and no further penalty be impose by the local power company on the next bill. Q: Identify the appropriate solution you want to offer to Client?.Justify SCIENTIFICALLY and MATHEMATICALLY the principles behind the solution.
There are a trformer and an induction machine. Those two have the same supply. For which device the load current will be maximum? And why?
what are the factors to be considered while design the breaker either HT or LT??
what is efficient motors and how it is different from normal induction motors
Why air circuit breaker off due to power failure?
solar inverters was not connected to the nuteral link .this nutwral possible to any other systems
what is the ATS .And how it works.
what is the voltage rating of chiller unit sensors
Control wiring of a dol starter for forward and backward
What are the classifications of oscillators?
Why IR value of the (HT cable Plus synchronous motor) is less while individually having IR values in GΩ?
Why AC current leads voltage in capacitor and how?
what is solkor relay and which condition it will act?
