What is the diff btw Conventional & Addressable Fire Alarm
System???
- 5 Answers
- 29761 Views
- Emerson, I also Faced
- E-Mail Answers
Answer Posted / s.gnanaprakasam
In addition to manivannan's answer i want to add one more
point.In conventional system all detectors in one zone were
connected in one straight line.so, if there is any failure
of one detecter in that line means futher detectors will
not get power and they will not work.
But in addressable also known as inteligent fire
alarm system, all detectors in the zone were connected
insame type of conventional system with small different is
thetail end detector's another end[one end is with previous
detector] is connected to fire alarm. In such a way all
detectors were in one closed loop.so,is there is any
failure in any detector means other detectors adjacent to
faulty detector may get power supply from other end of the
loop.Hence reliability of the system increases.
| Is This Answer Correct ? | 45 Yes | 12 No |
Post New Answer View All Answers
What are the major reasons for balancing hydro-thermal mix?
do we use links in a dc circuit?if so what s its use in it?
WHat is the requirement of installing FAST ACTING EARTH SWITCH in GIS and how is that integrated with protection system. How and when does it operate?
what is doubling factor in making current of a breaker?
An ISP is granted a block of addresses starting with 150.80.0.0/16. The ISP wants to distribute these blocks to 2600 customers as follows. a) 200 medium size businesses; each needs 16 addresses b) 400 small businesses; each needs 8 addresses c) 2000 households; each needs 4 addresses Design the subblocks and give the slash notation for each subblock. Find out how many addresses are still available after these allocations.
why dc is used in control circuits for MV & LV switchgeras instead of ac
we have 2.2kw,Y,3000rpm motor but 6leads found in TB what happen if we connect in delta?
What do you mean by passive circuit elements and why these are called passive?
How much kv gas generator is needed to run 2 hp and 1 hp airconditioners, plus a refrigerator and 4 Tvs
Whether it is possible to measure energy at the input of rectifier transformer (12 pulse with very high odd harmonics)
what is meant by 2 within a star in a voltmeter dial?
can we synchronize star system generators with delta system generators?
what is the transiant condition in alternator? and how it can be prevanted?
For a 6.6kV Motor it is recommended to do megger test with 500 V d.c and not more than 5kV d.c but the Hi voltage withstand test should be performed by 12kV AC. Why the dc voltage test should be limited but AC voltage withstand test could be with such a high voltage?
What are high pass filter and low pass filter? and What are the flowmeter ?
