Definition of grid?
- 7 Answers
- 10818 Views
- L&T, Pace Power Systems, Vijai Electricals, I also Faced
- E-Mail Answers
Answer Posted / yatish
In short grid is a space provide transmission and
distribution of electrical energy .
| Is This Answer Correct ? | 7 Yes | 3 No |
Post New Answer View All Answers
the problem faced on star or delta winding connection??
what shall be no load voltage of 132/33 kV transformer ? is it 33 kv of 34.5 kV
What is the meaning of loop in transformer
1. What is differential relay? How it operates? 2.How to calculate the Short Circuit Impedance in Transformer? 3.What is the alternate solution for testing of polarity by using polarity tester while its milli ammeter does not works? 4. While testing the 33KV Busbar by using Hipot kit, what should be the test voltage we have to apply? 5. What is the procedure/activities to be taken to inject the current more than 2000A by using 2000A Loading Transformer? 6. Explain how you can give the overload setting to any Motor Protection Relay for a HT motors with formula and example? 7. Why restricted earth fault protection is needed? Why can’t differential Protection is sufficient? 8. What should be the minimum and maximum ohmic value for earthing? 9. Why DC Currents are not used in transformer? 10. What is the Frequency while we step up the voltage from 220V to 11KV? Is it possible? Explain it?
how indusrial diesel generator work
I have made a 3 phase thyristor full bridge rectifier. But at the moment it is working only for the half bridge operation. Both the half bridges are on operation separately but when i put it into full bridge operation the oscilloscope output is zero. I rechecked that the pulses are correct for each thyristor. what could be the possible reason for this?
What are the significant parts of dc generator?
What are linear and non-linear systems?
Define filter?
Can anyone please provide me details of MCCB/Contactor/SFU rating calculations for a motor feeder..for example 50 kw.. not from type-2 cordination chart. i want manual calculations..
what is the formula to calculate voltage drop/loss on 66KV Transmission Line?
Why space heater is required for each verical bus bar chamber? if one space heater is adequate or not for anti condensation?
How time response of the system is divided?
What is capacitance?
Starting times for soft starter & power factor is thier any standard or datas available in manufactures list. Kindly suggest.
