if we convert kw into kva,which one formula use by us,pls
tell me?
- 19 Answers
- 22647 Views
- ABB, AEC, BGH, I also Faced
- E-Mail Answers
Answer Posted / shock moorthy
For 3phase supply
KW= 1.732VIcosQ
KVA=1.732VI
for 1phase supply
KW=VICosQ
KVA=VI
if KW givwn means
KVA=KW/CosQ
| Is This Answer Correct ? | 3 Yes | 0 No |
Post New Answer View All Answers
ASTM D 3455 - Standard Test Methods for Compatibility of Construction Material with Electrical Insulating Oil of Petroleum Origin has been used for Testing Transformer Oils with a product placed in it. Aged Control Oil has a Power Factor of 0.032% at 100°C. Aged Oil with a Test component has a Power Factor of 0.093% at 100°. Is this increase acceptable? If not why? How much increase is acceptable?
if we give 60 hz single phase supply to the transformer used in europe , than what will happen
What is George phenomena to start the synchronus machine?
how a resistor resists to flow the current?how an inductor oppses the sudden change in current?how a capacitor opposes a DC voltage.
1.why we are using metal oxide gapless block in lightning arrester,2.What is minimum and maximum rating of metal oxide blocks using in india
Define phase cross over?
What is trip and closing coil in cb? Why need of them
why the carbon brushes are broken in srim while the motor runningtime
I have one ct of ratio 3000-2000/1 Amp its knee point voltage mentioned on name plate is 500-333/30mA-50mA at Vk/2. in secondary box there is three terminal named 1S1, 1S2, 1S3 then on which terminal obtained the knee point voltage ie 1S1-1S2 OR 1S1-1S3 & also specify the knee point voltage for the ratio 3000 from name plate.
what is circuit breaker in transfomer and where it used
when measure the core loss of three phase distribution transformer or three phase reactor loss, one phase shown negative watt loss. why??
if we have a industrial load of 400 kilowatts with 415 volt AC then how much total harmonic distortion (thd%) should be acceptable for steady power system.
what type of earthing do for dry fissure rock?
how do you choose the cable size as per amps rating & the voltage drop for the same.
which is better to use svc or synchronous condenser why ?
