How to calculate the diesel generator efficiency? what
details are required to identify the running diesel
generator sets with 1000 kVA & 180 kVA?
- 11 Answers
- 88436 Views
- Greeves, Sudhir Power, I also Faced
- E-Mail Answers
Answer Posted / pillay
You did not say what efficiency, whether you get good KWH/ diesel consumption or whether the genset is loaded efficiently
Whatever, you need a KWH METER AND DIESEL CONSUMPTION METER.If you run your 1000KVA gen set for 20 hrs.your genset say at 0.8 pf it could have generated;
1000kva x 0.8 =800KWH per hr .SO FOR 20 Hrs s 16000KWH. If YOUR KWH generated reading says 12000kwh than your generator usage effiociency is 12000/16000 =75%
If the diesel consumption was 600ltrs than kwh/l is
12000/600 =20KWH/Litre diesel. you have to calculate seperately for both of them.
| Is This Answer Correct ? | 36 Yes | 34 No |
Post New Answer View All Answers
why dc is used in control circuits for MV & LV switchgeras instead of ac
What types of high speed CMOS circuits have you designed?
How can you sized or estimate the ligthning arrester current rating?
Does all the output contacts (N/O as well as N/C) of a Numerical relay operate when relay receives a binary input/inputs or contacts are designated to specific logic input/inputs and only these contacts operate?
What do you mean by pull of electromagnet?
What is clock position of Transformer?what are the clock positions are there?and what is different of them?
Define super node?
why they were using TRIAC instead relay in some controllers and what is the advantages.
what is buffer resistance starter.?.What is the working principle and where it is used..?
What is open delta Xformer? It's adavntages & Use?
how to calculate cooling requirement of datacentre from electrical load?
why on axial hitting up of air blast on hydrogen produced in oil circuit breaker,temperature rises of the core of the arc?
in basic 2 phase will short means tripping the power but spot welding 2 phase shorting but not tripping it will welded why.....(Q)
Why synchorised generators are used for the production of electricity?
Dear all, I'm manikandan I have done by DIPLOMA EEE from 2011 , I have 5 years of experience from Power plant instrumentation field , which one field is give long life & which one field is best ,I confused a lot and also I'm studying AMIE, can I choose which department from Section B examination? pls tell me
