Interested to Buy Any Domain ? << Click Here >> for more details...
why current transformer secondary side should be shorted ?
- 5 Answers
- 12796 Views
- Areva, I also Faced
- E-Mail Answers
Answer Posted / soumik
if it is open circuited the whole current in the primary becomes magnetising current and a dangerously high voltage will appear across the secondary which will cause insulation breakdown and even something worse.so it,s secondary always kept shorted.
| Is This Answer Correct ? | 31 Yes | 1 No |
Post New Answer View All Answers
In a 3 phase 4-wire system. For a 3.5 core cable if all loads are single phase and balanced, what will be neutral current? will it be sum of all phase currents? Or it will be zero? And if loads are unbalanced what will be neutral current?
why wire sizes are 3/29 or 7/29 and why not wire sizes are 2/29 or 6/29?
what is errection pcbs?
132/66kv sub-station procation ?
Is there chopping current in resistive circuit
1.main parts of generator? what is used A-check,B-check,C- check? 2.what is FM200 system in data centers? 3.difference between pac,ahu?
Draw a 230kv two-bus bar system showing the following. 1.Two generators (150MW) each connected through one 15.75/230KV transformers 2. 1 outgoing lines 3. Two 230/130 KV transformers 4. BUS PT's 5. CT
How to design the NGR Resistance
What is the Difference between Ac Drives and Dc Drives? According to application, speed, Torque, cost, Reliability, Construction, Motor etc... Thankyou !!!
Why derivative controller is not used in control systems?
What is advantages of VSCF wind electrical system?
Why the power factor improvement is so important in industrial loads
12.5 tons a/c is their how much kva generator can recommend to the customer.
write down the formula of cable size in RM if current is 50Amp.
difine electrical ballast in HPSVL
