how we can calculate the transformer size.
- 21 Answers
- 62697 Views
- Avalon, Edison, Hyundai, I also Faced
- E-Mail Answers
Answer Posted / narendra
Check the following
1.) Max connected load
2.) Max demand
3.) Load factor
4.) transformer efficency
5.) % loading
6.) provision for future expansion
Example
Total Connected Load in kW 870.00
Total Maximum Demand in kW (80% of CL) 696.00
Total kVA @ 0.8 PF 870.00
Total kVA @ 0.9 Load Factor 783.00
Transformer Capacity Chosen 2000
| Is This Answer Correct ? | 14 Yes | 13 No |
Post New Answer View All Answers
How can we calculate the efficiency of a Running (On-Load) Motor ? What parameters are required and what is the method ?
How do I calculate/select Droop CT ratio for various capacity of generators?
What are the criteria shall be considers for sizing Fuse and MCB? If the rated current is 10Amps what should be the fuse size / MCB Size?
tan delta equation test on alternators
how can you calculate fault level ?
Pl. share your experience about industrial-electronics repair of machine tool.
in power generator normaly voltagr betwween esth to neutral is 0 but my work place generator show the volatge is 60v any body know why? thanks
kindly send me 11KV MV motor differential protection procedure by primary injection method.
what is the circutor?why we use it ?
Can Anyone suggest the Standards (IEC or IS) for selecting copper current density?
we have require a Motor (1500kW, 6.6kV, 50Hz) which shall operate at 1500rpm during 30min and after it shall run on 500rpm during 15min. The same cycle shall be repetitive during the whole working days. Which method is best and economic to achieve such type of task. VFD, VVFD, Pole changing motor etc.
briefly explain principle of resistance welding
What is the necessary condition for stability.
How to calculate mf when meter equipment and meter are connected
Good day everyone,currently in our premise we using 30kw slip ring motor with resistance bank which we use as forward and reverse at conveyor bar handling. So,my question is how do we calculate the resistance bank which is suit the motor. Kindly,assist me... thank you
