Interested to Buy Any Domain ? << Click Here >> for more details...
what is the working difference b/w softstarter and
Variable frequency drive ?
- 6 Answers
- 11139 Views
- Parle, I also Faced
- E-Mail Answers
Answer Posted / kk_london
in soft starter you cannot control the speed of motor where
as in vfd drives speed can be varied by giving digital
inputs to the drive via plc. But both can control the
starting torque of the load.
| Is This Answer Correct ? | 6 Yes | 1 No |
Post New Answer View All Answers
Why we are going for converter transformers for DC drives application instead of distribution transformer?
A commercial Building is designed with 14th floor levels with indoor substation of three phase transformer with rated capacity of 1000 Kva.The transformer delivered 65% of its rated capacity at 0.67 power factor lagging.Because of low power factor, the power customer was penalized and certain cost was charged accordingly based on every point percentage lower than 85%.This situation may repeatedly happen on the succeding energy bills of power customer.The power customer is desired to improve its historical power factor of 0.67 lagging and no further penalty be impose by the local power company on the next bill. Q: Identify the appropriate solution you want to offer to Client?.Justify SCIENTIFICALLY and MATHEMATICALLY the principles behind the solution.
Pls tell me whether we can use EN3A material for shafts of Permanent magnet alternator.What will be the effect of magnetic and nonmagnetic material for shafts on magnetic properties of PM rotor .
1.dg on load alarm/stop alarm... 2.dg on load. piu alarm alarm kaise chek krte hai
Thumb rule of cable size(rm>30 rm)X multiplying factor=ampere
What is stepper motor. What is its uses?
What is the formulae of Megger value for a A.C.Motor
I need model question papers for RRB section engineer Chennai... Please send to my E-mail Id:- maitheerainbow@gmail.com
What is Fire Panel ? How it works ?
At the starting of dc motor and syn.motor and induction motor high current flowing through the winding. Due to this the windings burnt out. To avoid this different types of starters are used. But incase of transformer what Will be used (At starting no emf is induced in the primary winding)?
what is load vs Torque curve & why it is used?
how can we make cable shedule for controll wiring ? which details must be required for it.?
What is formula calculation size cable wire ?
Why use the vcb at high transmission system ? Why can’t use acb?
how calculate gd2 of ht motors
