Interested to Buy Any Domain ? << Click Here >> for more details...
What is BUCKBOOST TRANSFORMER and Operation of Buckboost
transformer?
- 4 Answers
- 9332 Views
- Voltamp, I also Faced
- E-Mail Answers
Answer Posted / santosh jagale birla cellulosi
Mr. Vasuram,
I heard first time that transformer works on DC suppy. Is
such transformers avilable in market.
Basically buckboost transformer itself disent step up the
volatage it requires a regulator wchich varries the tap
position and gives the desired O/P.
| Is This Answer Correct ? | 2 Yes | 1 No |
Post New Answer View All Answers
WHat is the general checks required for Dry type transformers
does the Trivector Meter of three phase automatically takes care of the low power factor and gives the reading accordigly or it does not take care of the Power factor while giving the readings please explain
I have doubt that the supply HZ (very low or high than rated ) may affect the power factor. is it true. ?
what is the difference between transformer,converter and transducer
We have drive feeding an output contactor for a 5000 hp motor @ 5kV application. The motor FLA is 629amps x 1.25% service factor = 786.25 amps The cable that we current have in place between the drive and the output contactor is 350kcmil- MV-105 (parallel cables). Per the NEC table 310.60 (C) (69). This show the cable ampacity is at 615 amps per cable for a rating of 1230 amps. We have derated the cable for the cable tray and the multiple cables application and our calculations show that after the correction factor factor we are at 922amps. 1230 amps x .75% correction factor factor = 922.5 amps. The customer is driving us to then use another safety factor of .25% off of the already derated cable. Can you please provide a longhand calculation for your solution on this application?
which type of motor is used in automatic swing gate
How to calculate that clean water supply in one Day from 150 KLD STP?
errection check list for transformer maintenance
What is the difference between rated and per unit in transformer?
If 24 KVA AVR having Input voltage 200-400v, Output voltage 415+-1%, what will be the voltage if Load is 13A.
what is auto re-closer?
What type of DC motor would you see for a lift?
What is load boxes ?
What is rotating magnetic field?Discuss elaborately.
I have 4 busbar of 1000 ampere. we use 4 busbar to make 4000 ampere in one phase.my problem is that when we applied 60% load on that then busbar produced high noise.what is the reason of that and how can i minimize that noise.
