in most industies hormonics present up to some level. what
is limit ? and there effect?
- 4 Answers
- 6616 Views
- Bhel, I also Faced
- E-Mail Answers
Answer Posted / ashim kumar das
In an industry harmonics are measured as TOTAL HARMONIC
DISTORITION (THD), which permissible limit in most of the
industries is 3%.
No doubt harmonic create losses, moreover puncture of
Capacitor banks,unwanted heating of motor are also the main
disadvantages of harmonics.
| Is This Answer Correct ? | 10 Yes | 0 No |
Post New Answer View All Answers
What is icu and ics in Acb and how many time icu or ics passes from breaker?
why on axial hitting up of air blast on hydrogen produced in oil circuit breaker,temperature rises of the core of the arc?
Earth has zero potential then what would be the neutral potential ?
can we use trip light with bus coupler?
In power transmission using open belts or horizontal shafts it is preferable to have the slack side of the belt on the top because
Briefly describe means used by electricity suppliers to influence the flow of active and reactive power in power networks (one for each type)?
we have one oven for 12 zone we are installed ir lamp in oven we control load from thyrister and 0 to 5vdc so our zone no 8 getting bright in fraction of second so what we do.. Please answer
I would like to know that the fault curretn at base load and at 10% generation will be same? Fault level of BUS remain same with different generation?
Difference between low impedance and high impedance Restricted Earth Fault
explain types of electric welding and its applications
Does magnetomonopoles exists? one maxwell equation strongly suggests no, but how about their existance in plasma?
Whether amorphous core transformer is commercialized or not:Name of company making amorphous core transformer and what are different rating?
electromechanical relay type identification example : type=tjmh t-stants for j- m- h-
can some one clearly explain why -48 volt DC use in telecom site????
A 400 V, 50 Hz, Δ connected synchronous generator has a field reactance of 0.1 Ω and armature resistance of 0.015 Ω. At full load, the machine supplies 1200 A at 0.8 pf lagging. Under full-load conditions, the friction and windage losses are 40 KW and the core losses are 30 KW. What is the machine’s overall efficiency? Ignore any field circuit losses.
