I have two switch.Two Uplink ports of a switch is
interconnected with other switch.consider uplink port of a
switch is 100 Mbps.Now tell me whether bandwidth of uplink
port will increase or not.IF it is How much?
Answers were Sorted based on User's Feedback
Answer / davidos
If the switches are manageable use the link aggregation
protocol,this will double the amount of bandwidth available
and you will have redundancy for your links.
It not you will crate a loop on your network and a brodcast
storm could bring it down!
hope that helps
| Is This Answer Correct ? | 8 Yes | 0 No |
Answer / getachew t.a
No it will remain what it is. You cannot double the
throughput because you have multiple feeds.
| Is This Answer Correct ? | 5 Yes | 0 No |
what is dhcp server?
Who is network administrator?
What provide communication between the computer and the main LAN cables and are located in the vampire taps attached to the cable.
why do we use c class of ip address(192 range) in organizations?
Non-authoritative answers can be incorrect mostly due to :
What would you use to make a 100mb network ? budget is low.
What entry in the /etc/gateways file would define a route to the host called host2 via the gateway called host4? Assume that host2 is 2 hops away and that the gateway is NOT expected to exchange RIP information.
I have to do a VLAN connection. I have a managed switch 2950 with 48 ports there r 34 pc connected through switch My aim is to create 3 VLAN. I want to use the IP adress 192.168.10.2 to 10.12 for VLAN1 so what could be the default gateway address of VLAN1.
Which port is reserved for FTP ?
What is the Difference between Broadcaste Domain and Collison Domain and where it is used ?
2 Answers DataCraft, DataGraph,
You have a class C subnet. You would like divide it up into 30 more subnets by "subnetting" ? What would be the subnet mask?
Best example of Flat Addressing Scheme among the following ? a. MAC addresses b. Classless IP addresses c. Classful IP addresses d. IPX addresses