If Nasa where to sink a large tube down a few miles into one of the deepest parts of the ocean or a spiral tube not so deep. Then fit electromagnetic monorail running gear to a sledge and then put a space cargo vehicle inside the sledge. With ball valves to compartmentalise the tube off to keep a constant pressure with inert gases as the space shuttle accelerates using electromagnetism to gain altitude and then loses the sledge. Next fires it's main rocket engines to carry on up to space. Would this idea work and would it save money on fuel if the space cargo vehicles where only say 5 ton cargo holds. Also they could be reusable with their rocket engines.

0 Answers  

---

What is PEPSSI?

3 Answers  

---

WIKILEAKS, a whistleblower website an international organisation base in a)USA b)UK c)SWEDEN d) NORWAY

1 Answers   High Court,

---

what are the disadvantages of science@

1 Answers  

---

what does the term means? " the MAC of nitrous oxide is 104" MAC= minumum alveolar concerntration.

1 Answers  

---

---

What is the difference between limit of quantification and limit of quantitation?

0 Answers   Cipla,

---

what is the reason for spark appearing in mixer grinder

0 Answers  

---

Programming in C JayLQue@hotmail.com 1. Which of the types listed below can be the type of the result value returned by a user-defined function? A) int B) double C) char D) all of the above E) none of the above 2. What is the output from this program? #include <stdio.h> void do_something(int *thisp, int that) { int the_other; the_other = 5; that = 2 + the_other; *thisp = the_other * that; } int main(void) { int first, second; first = 1; second = 2; do_something(&second, first); printf("%4d%4d\n", first, second); return 0; } A) 35 2 B) 1 35 C) 35 7 D) 1 2 E) 0 3. In function apart defined below, how many of the parameters are considered input parameters? void apart(double x, int *wholep, double *fracp) { *wholep = (int)x; *fracp = x - *wholep; } A) 0 B) 1 C) 2 D) 3 E) all 4. Variables that represent neither problem inputs nor problem outputs but are needed for internal computations are called _____. A) problem constants B) prototypes C) results D) formula variables E) program variables 5. This question concerns the following program fragment: char r, x, y, z, w; scanf("%c%c%c%c", &x, &y, &z, &w); if (x < y) r=x; else r=y; if (r>z) r=z; if (r>w) r=w; printf("%c\n", r); The program's effect can best be described as: A) It displays the letter 'r' after comparing it to x, y, and z. B) Of the four input characters, it displays the one that comes first in the alphabet. C) Of the four input characters, it displays the one that comes last in the alphabet. D) Of the four input characters, it displays the one that comes second in the alphabet. E) It displays nothing since characters cannot be compared. 6. In a function that receives a value from the main function via a parameter and then displays the parameter value on the screen, that parameter is considered __________. A) an input parameter B) an output parameter C) an input/output parameter D) a local variable E) a stub 7. What is the complement of the following expression? n||a <= b && c != 100 A) !n || a > b || c == 100 B) !(n && (a > b || c == 100)) C) !n && (a > b || c == 100) D) !(n || (a > b || c == 100)) E) none of the above 8. The if statement: if (13 < 12) printf("never\n"); else printf("always\n"); A) displays never. B) displays always. C) will not compile since 13 is not less than 12. D) causes a run-time error since 13 is not less than 12. E) displays nothing since 13 is not less that 12. 9. How many lines of output will be displayed by the following program fragment? i=0; do { for (j = 0; j < 4; j = j + 1) printf("%d\n", i + j); i=i + 1; } while (i < 5); A) 0 B) 7 C) 9 D) 16 E) 20 10. For what exact range of values of variable x does the following code segment display the letter 'C'? if (x <= 200) if (x < 100) if (x <= 0) printf("A\n"); else printf("B\n"); else printf("C\n"); else printf("D\n"); A) 0 < x < 100 B) x <= 0 C) 100 <= x <= 200 D) x > 200 E) 100 < x <= 200 11. The effect of the following program segment can best be described as __________. if (x > y) z = x; if (x == y) z=0; if (x < y) z = y; A) the smaller of x and y is stored in z. B) the larger of x and y is stored in z. C) the larger of x and y is stored in z unless x and y are equal, in which case z is assigned zero. D) the larger of x and y is stored in z unless x and y are not equal, in which case z is assigned zero. E) none of the above. 12. The expression: x *= i + j / y; is equivalent to ______. A) x = x * i + j / y; B) x = (x * i) + j / y; C) x = (x * i + j) / y; D) x = x * (i + j / y); E) none of the above 13. The facts that a function assumes to be true of the arguments that it receives are called __________. A) function input validations B) local variables C) postconditions D) preconditions E) none of the above 14. How many times is the loop body of the while statement executed? Refer to the following program segment. Assume that all variables are of type int. z=0; g=0; s=0; i=0; while (i < 50) { scanf("%d", &t); s=s + t; if (t >= 0) g=g + 1; else z=z + 1; i=i + 1; } A) once B) never C) 49 times D) 50 times E) until a number 50 or larger is entered 15. A special value that marks the end of a list of input data is called a __________. A) terminal value B) sentinel value C) loop control value D) input value E) loop termination value 16. Here is the prototype of a function: void five (double x, double* yp, int* zp); Given these variable declarations, which calls to five are valid? int m, n double p, q A) five(m, &p, &n); B) q = five(6.2, &p, &m); C) five(p, &q, &m); D) five(7.1, &p, &q); E) a and c only F) a, b, c, and d 17. The ______ of a function take(s) information into the function from the calling statement. A) local variables B) input arguments C) output arguments D) prototype E) purpose 18. If the input to the program segment below is 85, what is its output? scanf("%d", &s); if (s >= 90) printf ("A\n"); else if (s >= 70) printf ("C\n"); else if (s >= 80) printf ("B\n"); else printf ("D\n"); A) A B) B C) C D) D E) None of the above 19. The value stored in variable s at the end of the execution of the loop could best be described as __________. Refer to the following program segment. Assume that all variables are of type int. z=0; g=0; s=0; i=0; while (i < 50) { scanf("%d", &t); s=s + t; if (t >= 0) g=g + 1; else z=z + 1; i=i + 1; } A) the average of the numbers scanned B) the sum of the numbers scanned C) the largest of the numbers scanned D) how many numbers were scanned E) the sentinel value 20. What is displayed by the C statements that follow if the value input is 2? scanf ("%d", &ctl); switch (ctl) { case 0: case 1: printf("red "); case 2: printf("blue "); case 3: printf("green "); case 4: printf("yellow"); } printf("\n"); A) red B) blue C) green D) yellow E) blue green yellow 21. What is displayed by the C statements below if the value input is 3? scanf ("%d", &n); if (n = 5) printf("Equal\n"); else if (n < 5) printf("Less\n"); else printf("Greater\n"); A) Equal B) Less C) Greater D) No output 22. What will be the value of i after the C statements below have been executed? i=3; j=10; if ((3 * i) < j) i=i + 2; i=i+3; A) 5 B) 6 C) 8 D) 10 E) 15 23. Which of the types listed below can be the type of a function output parameter? A) int* B) double* C) char* D) all of the above E) none of the above 24. Which one of the following lines names a constant needed in a program that computes the price per square inch of a round pizza? A) scanf("%lf", &radius); B) pi = 3.14159; C) #define PI 3.14159 D) #include E) none of the above 25. Which one of these is not the name of a C library function? A) printf B) sqrt C) void D) scanf E) log

0 Answers   Indian Military Services,

---

1.how can you obtain D flip-flop and t flip -flop using jk flip- flop? 2.2 derive the expression of susceptibility of atiferromagnetic materials above neel temperature?

0 Answers   UITS University Information Technology Services,

---

Hai i am swetha from hyderabad.Plz let me no the details for medical transcription i am new to this field and very intersted to learn it.suggest me anyt instituions......as soon as possible. THANK YOU

9 Answers  

---

describe a difficult customer or co worker you have experienced in the past and how you dealt with him/her?

0 Answers   Royal Lancaster Hotel,

---

why n when we use data abstraction???

0 Answers  

---