Identify the purpose of the Ping command? A.) Share routing information with a neighbor router B.) Transmit user data when buffers are full C.) Test connectivity at layer 3 D.) Test entire protocol stack

Identify the order of the 5 step encapsulation? 1. Create the segment 2. Convert the frame to bits 3. Create the packet 4. Create the frame 5. User creates the data A.) 1,2,4,2,5 B.) 2,1,3,4,5 C.) 5,1,3,4,2 D.) 5,3,4,1,2

The Cisco IOS is stored where? A.) ROM B.) CD C.) Flash D.) NVRAM

Sequence and acknowledgement numbers are used for? A.) Layer transitioning B.) Flow control C.) Port number addressing D.) Reliability

Identify IPX GNS and it's purpose? A.) Go Network Server - sends a print job to a network server B.) Get Nearest Server - locate the nearest server C.) Guaranteed Network Services - allocates resources to users D.) Get Notes Server - locates Domino Server

Identify the true statement regarding subnetting? A.) Allows for more host address B.) Borrow bits from the network portion of the address C.) Allows for unlimited number of networks D.) Borrow bits from the host portion of the address

Inverse ARP serves what purpose? A.) Method for a local router to introduce itself to the remote end of the connection B.) Broadcast a routing table update C.) Identify MAC addresses if the IP address is known D.) Sent every 10 seconds used to verify the Frame Switch is still active

Identify 3 characteristics of a MAC address? A.) Burned into the NIC B.) 48 bits long C.) Length is 32 bits D.) Used to deliver the frame to the end device E.) Contains a network portion and a host portion

Identify 3 IP routing protocols? A.) RIP B.) AURP C.) OSPF D.) IGRP E.) ARP F.) ICMP

Identify the type of routing protocol that exchanges entire routing tables at regular intervals? A.) Link state B.) Interior gateway protocols C.) Appletalk routing D.) Distance vector

Identify the type of hardware required to connect a Token ring network to an Ethernet network? A.) Repeater B.) TR-Enet C.) Router D.) Token Ring to Ethernet translation hub

Identify 3 characteristics regarding CDP? A.) On by default B.) Shows only directly connected neighbors C.) Requires IP or IPX D.) 60 second update interval by default E.) 30 second updates interval by default

Identify 2 transport layer protocols? A.) IP B.) TCP C.) CDP D.) ARP E.) UDP

Identify 2 features of X.25? A.) Supports only IP B.) Utilizes switched and permanent virtual circuits C.) Contains minimal flow control and error recovery D.) Utilizes LAPB as it's data-link protocol

Identify the purpose of the Trace command? A.) Explorer packet transmitting routing information B.) Test connectivity C.) Determine the path a packet is taking through the network D.) Transmits user data when buffers are full