Interested to Buy Any Domain ? << Click Here >> for more details...
What is the basic diffrence between Electronics &
Electrical engineering
- 13 Answers
- 18275 Views
- I also Faced
- E-Mail Answers
Answer Posted / gopi
in electrical the current is passed troughthe conductor and
in electronics the current is passed through semi conductor.
| Is This Answer Correct ? | 18 Yes | 3 No |
Post New Answer View All Answers
what is formula to cal cute earth pit numbers and size of earth strip used in earthing?
If we are given a 10 amp cable type and asked to calculate the number of cores used and the thickness of the cable, how do we do it?? please help...urgent!! i hope the question is clear enough!!
I have a relay contact rated at 220v dc which is supplied with a 24vdc from the panel,for it to trip the dampers(24vdc).What if the application of the relay changes so that it should work at its rated 220vdc then will it work at 24vdc supply given or any other consideration needs to be taken .....
what is reverse power relay brief explanation and in b/w where it is connected
why dc is used in control circuits for MV & LV switchgeras instead of ac
How to calculate the Harmonics losses in terms of cost/unit.
For a 6.6kV Motor it is recommended to do megger test with 500 V d.c and not more than 5kV d.c but the Hi voltage withstand test should be performed by 12kV AC. Why the dc voltage test should be limited but AC voltage withstand test could be with such a high voltage?
How can we calculate the transformer rating if the load calculated is 1000KW (11Kv Supply)?
Define non-touching loop.
What is the function of electron gun assembly used in crt?
y we use neutral,all r told its used to for closed path..k its a just used to closed path,in a transmission line y we put same conductor used n both phase and neutral..if we use less than phase conductor in neutral mean we ll reduce cost its right r wrong..if we use mean any problem occur in transmission line..
if field breaker of generator is closed prior to its rated speed on a power generating unit. what will be the effect on generator, unit transformer and starting transformer.
for what voltage will reactive power be largest in 380 kv line : a) 375kv b)380kv c)385kv
why EMF IS INDUCED IN A CONDUCTOR WHEN FLUX LINKING WITH IT CHANGES ACCORDING TO FARADAYS LAW.
What happens if the Capacitive Voltage Transformer Primary neutral is not earthed. There is a CVT between Transformer and source, and the CVT neutral of the transformer is not earthed, does it effect the transformer while charging or does it effect the transformer charging process.
