Interested to Buy Any Domain ? << Click Here >> for more details...
wat s the difference between diode and capacitor
- 20 Answers
- 30459 Views
- TCS, I also Faced
- E-Mail Answers
Answer Posted / hore_aec
1. Capacitor can store the charge but diode can't.
2. Diode can convert AC into DC.
| Is This Answer Correct ? | 19 Yes | 3 No |
Post New Answer View All Answers
what is the difference between electrical and electronic choke?
what is the purpose of slope in the differential relay?why we are using two slope?but in busbar differential we are using only one slope.why?
A 3 phase transformer's (Y-Y) Y and B phase is (Y and B connection not broken) broken from neutral and R and Nutral connection is ok, what will be the relay tripping and why
how maney type tempereture measurement ?
why the making current is more than then the breaking current and if its true then its about a controling circuit or breaker power contact points
What is proportional controller?
What is the complete procedure of erection of electrical panel in industry
Earth leakage relay basic knowledge principle
ii) A shunt motor supplied at 230V, runs at 900 rpm when the current is 30A. The resistance of the armature is 0.4 ohms. Calculate the resistance required in series with the armature to reduce the speed to 600 rpm, assuming that the armature current is then 20A. [12]
why T/F winding temp measurement cts are odd secondary current ie,109A/1.2A/1.4A?
what is POTT and PUTT explain?
why various test are performed on electrical panels & power cables before commissioning on site & what are these test???
Define load factor?
what is difference between window type and wound type transformers?where we will use window type and wound type transformers?
A 15 kw squirrel cage motor having a maximum efficiency of 90% on a continuous full load has temperature rise of 42 degrees celcius after 30 min and 52 degrees celcius after 1 hr under the above operation conditions. a) calculate its final steady state temperature rise on continuous load and the heating time constatnt. b) if the motor is operated on a short load for 9 min estimate its temperature rise. c) calculate the maximum overload that can be applied on a short, 9 min rating so that the temperature rise is the same as the final steady state temperature rise on continuous load.
