Interested to Buy Any Domain ? << Click Here >> for more details...
What is the power factor you maintain at ur organization?
- 43 Answers
- 103946 Views
- Cummins, Exide, Johnson and Johnson, KTC, Microsoft, Powergear, Secure Meters, Suncity Strips, Wheels India, I also Faced
- E-Mail Answers
Answer Posted / anu
all are telling its 0.9 to 1 but nobody is not telling how
ur maintain that? what are the technics using for that?
| Is This Answer Correct ? | 4 Yes | 1 No |
Post New Answer View All Answers
What happens to a line-frequency of high-frequency transformer when it is first energized/ re-energize?
1. A 380 / 220 V r.m.s. 3-phase 4-wire circuit carries loads of 8 + j8.1 ohm; 4 + j4.1 ohm; and 2 +j2.1 ohmin the three phases respectively. The length of the circuit is 100 m, and the resistivity of the phase conductors is 0.0005 Ω/m. The neutral conductor is of the same size as the phase conductors. a) Select a reference angle 0for the first phase. Then write down the three phase voltages in both polar format and complex number format. b) Make appropriate assumptions, and take temperature effects on resistance is insignificant. Calculate the currents in the three phases. (Note: Determine conductor resistance, and apply Kirchhoff’s Voltage Law) Based on the result, suggest a main switch rating for the circuit. c) Show your preferred direction of neutral current in a diagram, and then determine its value. (Note: Apply superposition principle, and Kirchhoff’s Current Law) Use its magnitude to show that in this circuit, the unbalanced load may increase the voltage drop in some of the phases. (Note: Also observe the common volt drip in neutral) State your assumptions, if there are any. d) Suddenly the neutral wire of the circuit is broken. Estimate the new currents in the first phase, i.e. Phase L1. State your assumptions, if there are any.
What is a surge supressor why its is used in synchronous generators
1.main parts of generator? what is used A-check,B-check,C- check? 2.what is FM200 system in data centers? 3.difference between pac,ahu?
Distribution transformer we provided 2 separate earthing pit for Body and 2 separate earthing pit for neutral,we can not connect separate body earthing pit to other earthing pit but we do metal glanding in secondary side cable termination in both side, transformer and PCC panel (LT Panel), is this safe for transformer and other equipment?
What is the function of a neutral reactor.
Explain the operation of grid connected central solar inverter ?
What is the permissible maximum flux density in transformer core?
difference between crane drive and line drive.
how can we calculate the ampacity of the electrical wire/cable. and what are the factors must be considered. pls. elaborate.
How many methods use the load flow solution?
Hello everyone, somebody knows what is a "surplice power" ? The hole phrase is: "This rating is appropriate for a generator set paralleled with an infinite bus e.g. a national electrical supply network or grid where the generator set is run at 100% load, 24 hours a day, 365 days a year and any surplice power is exported into the grid" Thanks in advance.
I have been using an 600VA with 0.6 p.f UPS with my desktop which has 450W power supply unit. Can anyone explain how can this happen . Because the output of the UPS is 360W (600*0.6) (<450W)
why the earth is taken minimum in supplying? wather it the proportional factor to getting work any equipment or a power plant?
What's mean HVF & HAF in Vacuum Circuit Breaker?
