Interested to Buy Any Domain ? << Click Here >> for more details...
pls send me HPCL & reliance test paper for chemical
engineering.....
- 4 Answers
- 14242 Views
- BCPL, HPCL, NOCL, Reliance, I also Faced
- E-Mail Answers
Answer Posted / man singh
pls send me HPCL & reliance test paper for chemical
engineering.....
| Is This Answer Correct ? | 13 Yes | 9 No |
Post New Answer View All Answers
MY generator water cooler inlet line height - 11 mtr inlet water line height - 7 mtr water come into the line from overhead tank, O/H tank height - 20 mtr the first tapping in the inlet line is 2" line which down to 4 mtr level plateform., second tapping in inlet water line goes to a pump 6" line installed at 4 mtr level plateform, pump capacity 200m3/hr, head- 30 mtr, hp-40. the outlet of pump of 6" water line connected to a header of 6 mtr long of 6" line, on this header the six tapping are connected, 4 nos. 3" line goes to 11 mtr height water cooler the pressure of the line is 0.15 to 0.25 kg/cm2, 2" and 4" pipe line connected to a cooler at 4 mtrlevel plateform. my question is, at 11 mtr height level the quantity of water and flow is not sufficient for my cooler, the temp. of cooler is rises much more. you are requested to suggest the modification of pipe line/ pump for take more water flow and pressure (desired pressure is 1 kg/cm2)
Why should chemical equation be balanced?
What is pneumatic conveying?
What is minimum flow required of NG having BTU value of 920 btu/scf for flame stability of LBTU gas of BTU value 220 BTU/SCF against the flow 80KPPH.
What are the different types of equipments for the conveyance of solids?
What are the advantages and disadvantages of using gear pumps?
What is an additive?
Please help to get IOCL/HPCL or other chemical engineering paper pls send kathir_skv@yahoo.com Regards, kathirvel
Define viscosity?
Define pneumatic conveying?
What is the best way to handle bend or turns in slurry piping systems?
What industries require filtered compressed air?
Explain what is the best way to configure a bypass line in slurry services?
In Galvonised iron and stainsteel pipes, in which pipe friction losses will more and why ?
What are the criteria’s involved in choosing mass balances for components?
