how we calculate electricity unit ( meter unit.. for knowing how many charges) from on motor load.?
- 2 Answers
- 2218 Views
- I also Faced
- E-Mail Answers
Answer Posted / antarjyami behera
1000 watt=1kw,1000wh=1kh, 1kh= 1unit
| Is This Answer Correct ? | 0 Yes | 0 No |
Post New Answer View All Answers
I want single line diagram for AMF & DG syncronizing panel
what maximum range of star & delta in hp or kw ?
Basic motor transformer generator
A commercial Building is designed with 14th floor levels with indoor substation of three phase transformer with rated capacity of 1000 Kva.The transformer delivered 65% of its rated capacity at 0.67 power factor lagging.Because of low power factor, the power customer was penalized and certain cost was charged accordingly based on every point percentage lower than 85%.This situation may repeatedly happen on the succeding energy bills of power customer.The power customer is desired to improve its historical power factor of 0.67 lagging and no further penalty be impose by the local power company on the next bill. Q: Identify the appropriate solution you want to offer to Client?.Justify SCIENTIFICALLY and MATHEMATICALLY the principles behind the solution.
What will happened if the neutral of secondary of Xformer ( Star point) Note it's above KVA rated Xformer
WHAT IS DIFFERENCE BETWEEN MANUAL CONTROL AND MAGNETIC CONTROL AND STATE ITS ADVANTAGE /DISADVANTAGE
Draw a SLD of DG distribution up to main LT panel?
Why in metering Ct for ammeters ct secondary side is grounded for each Ct but not in case of CBCT (Core balance current transformer)..kindly some1 highlights the reason..is it because net flux is zero?
How many Zones can be in Conventional type fire alarm system & how can we detect the fire in Conv. type FAS?
Power factor =1.000 at factory in supply. However, PF = 0.8 at motor end. Current = 100 Amp, Voltage = 400 V. What is the power distribution loss? Can I reduce it by adding capacitor at the load feeder?
Assuming that a dedicated neutral earthing transformer is provided for each GT generator, when the two generators are running in parallel, has consideration been given that the earth fault current from one generator stator winding be split between the two neutral earthing transformers? If so, what adverse impact will this have on the operation of the 59N and 27TN devices?
10 Mtr Hight of Lighting Arrestar how much area coverd??
What is the different types of cable & current capacity of cable
What are the differences between single phase and three phase?
What are the two segments of nyquist contour.
