Interested to Buy Any Domain ? << Click Here >> for more details...
I have 1500KVA transformer ,How much Maximum KW Load is
allowed?
- 15 Answers
- 68951 Views
- GKC Projects Limited GKCPL, I also Faced
- E-Mail Answers
Answer Posted / nivin
1500kVA or 1500000VA
Roughly when the power factor is 0.8, it has an efficiency of 80%.
1500kVA x 0.8 = 1200kW or 1200000 Watts
Also considering other heat losses, another 10% more will be reduced.
So the practical possible load will be 1080kW or 1080000 Watts
| Is This Answer Correct ? | 0 Yes | 0 No |
Post New Answer View All Answers
why and how voltage sharing in transformer, during magnetic balance test ?
what are the basic insulation levels & what its Unit
what is class of SPD and dittels of all class ?
what is doid
A powerplant has 8 gensets operating in grid parallel mode. In one genset sometimes there is pf variation and kvar variation. The plant operates in pf mode. When this variation is observed the load is stable, voltage is also stable, freq and genset speed is also stable. How will you check the functioning of pf card. What shall be the ideal output vdc of the pfc, from there it is input to AVR?
why single phase to grd test in HV cable?why not 2 phase at a time?
what is the use of permanent magnet generator in exciter
How to calculate the volumetric capacity of a oxygen & Nitrogen gas Cylinder if pressure is 145 kg/cm2 & water capacity of cylinder is 67 liters.
1.what is difference in maintain Hz again Hz in USA ? 2.how to calculate the battery AH? 3.why are yearly maintained in transformer how many tests in required?
what is the pulse and audio frequency transformer? what is different between induction regulators and tap changing transformer?
Which motor is 3.3 or 11kV more reliable, in terms of efficeancy,maintenance, reliability.
Draw a 230kv two-bus bar system showing the following. 1.Two generators (150MW) each connected through one 15.75/230KV transformers 2. 1 outgoing lines 3. Two 230/130 KV transformers 4. BUS PT's 5. CT
Can we put 3 layers of cable tray while installing tray
What are the factors which influence the choice of specific magnetic and electric loadings of a synchronous machine?
explain comutator action in detail.thanks
