Interested to Buy Any Domain ? << Click Here >> for more details...
srij i need the relationship b/w KW AND KWH and with an
electrical example. plz send if u can?
- 4 Answers
- 6466 Views
- I also Faced
- E-Mail Answers
Answer Posted / aakash5994
1KWh= 1 KW * 1 he
i.e if we run an equipment of 1 kw for 1 hour then energy consumed will be 1 kWh i.e 1 unit
| Is This Answer Correct ? | 0 Yes | 0 No |
Post New Answer View All Answers
What is time invariant system?
Why does the adjacent zone of protection overlap?
What is inductance?
what is the most permissible winding temp when we conducting a generator load test?(condition no load)
A 100 kVA , 400 v/250 kv testing transformer has 8% leakage reactance and resistance on 100 KVA base . A cable has to be tested at 500 kv using the above transformer as a resonant transformer at 50 hz . if the charging current of the cable at 500 kv is 0.4 A find the series inductance required . Assume 2% resistance for the inductor to be used and the connecting leads . Neglect dielectric loss of hte cable . what will be the input voltage to the transformer ?
What will be the voltage regulation of a full load and 0.80 power factor lagging load transformer when a two winding single phase transformer has a voltage regulation of 4.5% at full load and unity power factor?
How cmd is calculated in case of energy neters
what curve and rateing would you use for a three phase 0.75kw motor?
Comment on the working principle of operation of a single-phase transformer.
how to calculate the change over time for star delta starter for different KW motor?
what is meant by LCR meter? where its useful ?
what are the applications of PLC?
in wind mill use 2100 kw asychronous generator ( induction generator ) rotor voltage : 3300,stator voltage : 690, rpm : 1511 type : MRL063E04 ' we check rotor resistance magger value found following. R-EARTH - 00 M.OHM,Y-EARTH-34 M.OHM,B-EARTH- 33M.OHM R-Y: 31 M.OHM, Y-B: 00 M.OHM,B-R :33 M.OHM HOW CAN I TAKE DECISION?pls ans. quickly
While testing a ZCT what parameters have to check or measure?
Hi Suppose we have a wye/wye transformer which is grounded at both sides,in this situation, do we have ay ground transformer? in other words, ground transformer can do any thing more (while we have nuetral wire in both sides)? As the last question, what about 3rd harmonic? we have two choices: first using wye/delta transformer + ground transformer and second using wye/wye earthed connection.in the former choice, we dont have 3rd harmoonic at the secondary side but what about Yn/yn conection? do we suffer from 3rd harmonic in the Yn/yn connection?
