what is the use of capacitor in online ups?
- 6 Answers
- 17578 Views
- Emerson, ups, I also Faced
- E-Mail Answers
Answer Posted / nagesh.patwari
Not All UPSs Must Have Input Harmonic Filter Capacitors
Though almost all UPS systems use capacitors in their output, one UPS topology demonstrates that reliance on capacitors in the input is not required. Delta Conversion UPS configurations are now gaining wide acceptance as a means to assure maximum compatibility and stability of engine generators without adding large input capacitor-based harmonic filters.
Instead, this design applies two bidirectional power converters so that the primary delta converter acts like an active harmonic filter, maintaining less than 5% THD current distortion from no load to full load, without the use of capacitor-based filters. The UPS maintains power factor at an ideal unity PF, never falling leading or causing voltage problems on the generator.
The double conversion UPS consists of a one-direction rectifier/battery charger driving a one-direction inverter that powers the critical load.
The two converters of the Delta Conversion UPS are bidirectional, enabling the UPS to aid in the engine-generator's stability. These two converters are controlled so that, as a load, the delta conversion is a constant unity power factor load of a sine wave form from no load to full load And, the Delta Conversion UPS achieves this ideal unity power factor and low input harmonic distortion without the need of a large input capacitor bank.
Both capacitors I/p and o/p - AC AND DC Capacitor in UPS ARE USED FOR VTG FILTRATION OR SMOOTH OUTPUT POWER
| Is This Answer Correct ? | 0 Yes | 0 No |
Post New Answer View All Answers
I have 2 KW electric water heater.I am gonna use it in controlling water temp.so I needed to increase or decrease the heating capacity.is there any electrical-electronic circuit for varying the resistance & so current?
What will be in Mahagenco Trade Test Exam? I want to know the same.
what is the Pickup/drop off ratio in BCPU relays
how net resistance islow in star connection and viseversa in delta connection...? if anybody could explain in detail it wud be helpful.
A 400 V, 50 Hz, Δ connected synchronous generator has a field reactance of 0.1 Ω and armature resistance of 0.015 Ω. At full load, the machine supplies 1200 A at 0.8 pf lagging. Under full-load conditions, the friction and windage losses are 40 KW and the core losses are 30 KW. What is the machine’s overall efficiency? Ignore any field circuit losses.
1.4 What is meant by CT knee point voltage and how would you determine it
why the name trunking bus PT
For a stable system, where should the poles of a system be in a root loci plot?
How can eliminate noise problem inside temperature controller temp. variation due to contactor chattering problem.
Hello everyone, somebody knows what is a "surplice power" ? The hole phrase is: "This rating is appropriate for a generator set paralleled with an infinite bus e.g. a national electrical supply network or grid where the generator set is run at 100% load, 24 hours a day, 365 days a year and any surplice power is exported into the grid" Thanks in advance.
My question is abt backlog.I had dropped one subject in my second year, and completed this subject in the 3rd attempt, so how many backlogs i have got?1 or 3?plz sujjest the answer as soon as possible
State norton’s theorem?
Which device of PlC does share load between DG sets when DG are running in perallel?
Is there any type of starter for DC motor other than two point,Three point and Four point starters?
What is called limb of a transformer?
