Interested to Buy Any Domain ? << Click Here >> for more details...
how to choose the cable rating for load (KW)? EXAMPLE.50KW load
- 14 Answers
- 172754 Views
- ACC, NCUI, Polycab, PowerSol, Siemens, SW, I also Faced
- E-Mail Answers
Answer Posted / electrical engineer kaleem 055
As my 5 years of experiance. I am still working in construction field as Electrical Engineer. Let me tell you 1 easy and good method to find the cable size for load , Earth cable size for load and to find the exact circuit breaker size which is require for load.
Always keep it in your mind that if load will 30kw or 20kw or 50kw etc always select the cable size 1 step down from the given load.Example for 30kw load cable size will be 25sqmm. and for 20kw it will be 16sqmm.etc
for earthing cable always load divided by 2. Example for 30kw load earth size will be 15 but in market 15 is not available so use 16sqmm yellow green cable and for 20kw load use 10sqmm cable etc.
Now for circuit breaker.
Always load multiple by 2 so that will be your mcb size.
Example if you are using 30kw load
30 x 2 = 60 so you will use 60 ampear mcb for 30kw load.And for 20kw use 40ampear breaker.
| Is This Answer Correct ? | 0 Yes | 2 No |
Post New Answer View All Answers
Installation resistance for whole installation of 16 kva & 25 KVA DTRA a) Between each conductor b) between conductor to earth c) installation resistance for each apparatus, each conductor to earth d) earth resistance for the system of earthing
do we use links in a dc circuit?if so what s its use in it?
In a voltage-controlled current source A A current booster is never used B The load is always floated C A stiff current source drives the load D The load current equals Isc
what is charger supervision and control supervision?
Is there any rule to select the voltage of motor based on KW rating? What is the rating above which lt motor becomes the HT motor?.
what about SAP/MRP regarding manufacturing of electric motors and all drives?
If 100 KAV USP dedicated earth got disconnect / Cut. What will happen at load.
i need the curve duty cycle and amper for (150 kva @50% dyty cycle) transformer turn ratio :19 and vin 400
How can i calculate the Breaking capacity of molded case circuit breaker, is the breaking capacity of CB for Diesel generator shall be less than grid supply's breaker ?
how to calculate differential current when we testing differential relay..suppose we have 1000kw generator,630amp VCB,what value we should put /inject so that relay trip the VCB? PLLZ justify ur comment
could you measure current in parallel?
what is the condition for YnD11
How can maintain our H.T. motors used in cement plant. please send me procedure.
is ac supply can store
Dear Brother can u tell the proper size selection of cable & the fault level calculation of braker, busbar etc. pls mail me at azeemk30@gmail.com
