Interested to Buy Any Domain ? << Click Here >> for more details...
why the generating voltage in India is 11kV or why is it be
transmitted as multiples of 11
- 34 Answers
- 123962 Views
- ACC, Bhel, ECI Engineering and Construction, NTPC, SBL, Senthur Power Services, I also Faced
- E-Mail Answers
Answer Posted / aman
The Answer To the Question why Generating Station Produces multiple of 11 Kva Is Not Using The Form Factor i.e -1.11 but the Fact is that At Receiving Ends they Require 10,20,30... Kva. Some Of the Energy Is consumed Due to Voltage Drop and losses During Transmission so They Generate an Extra 10% Energy of the Required energy i.e 11kva....
| Is This Answer Correct ? | 0 Yes | 0 No |
Post New Answer View All Answers
what are the necessary basic electrical topics to learn for mechanical engineer to deal practical problems.
How we calculate the Multiplying Factor of Kwh meter for 3 phase alternator.
What is the most important precaution in any experiment with d.c. Shunt motor?
to hook up ten 50 amp rv pedastels at a lenth of 600 feet from the service what size will my service need to be and the size of wire will I have to run to each pedastel in series??????
what is the current setting for different relay protection for transformer .
Is it advantages of having star-delta vfd than normal star vfd , if yes why?
i wasted one year for the job after completed my btech what can i say about 1year time in interview
What types of CMOS memories have you designed? What were their size? Speed? Configuration Process technology?
state the working of discharge lamp?
Draw torque - speed curve and load curve of induction motor? mark operating point ?
CALCULATE THE TOTAL VOLTAGE DROP AND SELECT THE CABLE SIZE IN MM-SQARE FOR A PANEL-262KW AT 110 METER FROM THE SOURCE SUPPLY , SUPPLY VOLTAGE 240/415
Is there a diode made that works with AC 120 volt 20 amp? If so can it completely stop all current flow in 1 direction at all times?
What is the meaning of 40X8X2 busbar dimensions for carring load of 400 Amps
What is BusBar integrity test and how it is conducted?
Is it good to short Neutral and Ground in the PLC or DCS main Power supply. Pls give YES or NO with reasons...? Simarpreet
