What is the rating of your capacitor bank at your company.
Answer Posted / sandeep sharma
-Depend on the load ....
| Is This Answer Correct ? | 2 Yes | 0 No |
Post New Answer View All Answers
What is Instantaneous Earth fault relay,how will work
Define relative stability.
A 7 storey building has a floor area of 35,000sq.ft on each storey. On the ground floor 11KV electrical sub-station is to be erected. A load of 3kw for every 400sq.ft (p.f is 0.8) is proposed for each floor. fire pump 7.5hp, water pump 5hp, lift 2 nos, each 10hp and 20shop load of each shop is 5kw. calculate a. load each floor b. total load of building c. L.T feeders for aech floor and from transformer to main. d. distribution diagram e. capacity of sub-station/capacitor bank f. line diagram
What is the difference between electronic regulator and ordinary rheostat regulator for fans?
how we select ac fuse rating of an power inverter???
What is the RME and explain the full form and what is the RME work?
Can i use the B-curve MCB instead of C-curve MCB
Can we use 230VAC, 63A MCB for 120VAC, 63A supplied heaters load?
What is the power requirement of tamil nadu for one month?
A 50Hz,4-pole,3-phase,star-connected synchronous motor has a synchronous reactance of 12ohmsper phase and negligible armature resistances.the excitation is such as to give an open-circuit voltage of 13.2kilovolt.the motor is connected to 115kilovolt, 50hertz supplying. what maximum load can be the motor torque,line current and power factor?
what is the differencce inn series and cascade connection??
What is resistance of 50meters, 16sq.mm, single core copper cable?
WHAT IS AIR GAP VALUE IN MM FOR A 11KV BUSHING OF 11KV/440V DISTRIBUTION TRANSFORMER. AND AIR GAP VALUE OF 25 KV BUSHING OF AT TRANSFORMER OF 25 KV TRACTION. WHAT IS THE CALCULATION FOR THE AIR GAP PERMITTED FOR BUSHINGS AT DIFFERENT VOLTAGES.
What is the alternate solution for testing of polarity by using polarity tester while its milli ammeter does not works?
i want to know how to determine that a surge arrester work properly in 11kv system. and how to test a 12kv surge arrester