Interested to Buy Any Domain ? << Click Here >> for more details...
what is Green field /brown field exposure in chemicals /oil /petrochemicals /refineries /paints /speciality chemicals /gas /FMCG /glass industry
- 1 Answers
- 3325 Views
- I also Faced
- E-Mail Answers
Answer Posted / satish
Green field exposure relates to having worked on a project from the concept/FEED stage until the completion of construction/Commissioning. It can also be limited to be part of the design phase from beginning or Construction phase from beginning.
The brown field exposure pertains to having experience in working on small or large scale modifications in any plant/facility/unit etc......In this case the owner of such a facility intends to upgrade their production capacity by make changes to some of the process.
In green field projects you have the luxury to decide on your own what is good for the project while in brown field you may have to consider the already existing design/philosophy/models etc to maintain a uniformity and help the operations people.
| Is This Answer Correct ? | 2 Yes | 0 No |
Post New Answer View All Answers
why we use impulse line of flow transmitter at 45 deg. angle both side of orifice plate.
what is effect of specific gravity in differential level transmitter , explain formula related with this .
Hi i am aneesh, done btech in applied electronics & instrumentatiin. And then i took mba in finance & marketing.After that i got placement in finance co and worked there for 3.5 yrs.Now i wanted to come back to engineering job.But without engg experience, i may not able to find an opening.i have done a course related to flow meters and ite calibrations. Kindly suggest where should i try to get a job?
send me model hpcl questions pleas..........my mail id mohideen.dharvesh@gmail.com
What is first echo & echo window in radar type level transmitter?
i have been asked by QAFCO to appear for interview for thy post of Instrument Designer(INTOOLS)..i m engineering graduate with 5 years exp. in design engineering.Will this job profile suit me??i need all ur help n suggestions for thy same?
what are the values of fuel flow rate in various places in boiler.
Isometric drawings are generated during _________________ phase of a project
State four different types of flow measurement, for gas flow measurement MMSCFD is the common unit expand the unit and specify significance of word S in the unit.
what is o2 analyzer and how it measured ,what is the role of this analyzer in cfbc boiler...
what is KV and XV valve
Introduce yourself which is not present in your biodata?
send me last 5 years questions asked in rrb chennai, for section engineer
A PLC is programmed to drive three motors A, B and C as follows : After running motor A for an hour, motor B should get ON and motor A should get OFF. And after running motor B for an hour, motor C should get ON and motor B should get OFF. And after running motor C for an hour, motor A should get ON and motor C should get OFF. (That is, a cyclic repetition with time period one hour) Now, the second condition is: If any motor gone faulty and is tripped, the consecutive motor should get ON and the faulty (tripped) motor should be eliminated from cyclic repetition. The remaining two motors should bear the cyclic repetition of one hour each. (For healthy motor take logic as high and for tripped motor take logic as low) Now, the third condition is: When motor A load(Amps) exceeds 60% of its rated load, motor B should get ON in parallel to motor A. And when both motors A & B are running in parallel, and if their load exceeds 60% of their rated load, motor C should also start in parallel to A & B. [Here the cyclic repetition is eliminated, until their loads become normal(40%)] [Take logic high(1) for load at 60% and logic low(0) for load at 40%] Now draw a flow chart or a ladder diagram to fulfill the above condition.
What is limitation of the ht.of the displacer of a level trol?
