Interested to Buy Any Domain ? << Click Here >> for more details...
Answer Posted / jagyanseni ojha
iron oxide
| Is This Answer Correct ? | 2 Yes | 0 No |
Post New Answer View All Answers
For removal of formwork of simply supported slab / beam from where to start the deshuttering? ( Max Bending moment of the simply supported beam is in the center hence is it required to start from the supports?)
Why are steel plates inserted inside bearings in elastomeric bearing?
Concrete cover for slab, column, beam and footing?
Define What is unit weight of normal concrete?
What is the l/d ratio of cantilever beam?
How can you distinguish between sorption, absorption and adsorption?
As per Kandal suggestions, we have implemented rolling starts on 140 (+/- 5) degrees and we kept 3 rollars to complete the rolling before falling 125 degrees and the Aggregate AIV is below 22. But When the DBM bed is being rolled 3rd high viabration, (Before 1 plain & low ,2 high Viabrations), the aggregate is getting sharp edge agg. projections are damaged. As the literature is said that, the VG-30 Grade having better control the temp. susceptibility than Penetration grade. if so we could not get this problem at site. But we are facing on site. let me know.
5. Two long boundary walls run parallel to each other at a center to center distance of 1 meter apart. The width and height of the first wall are 0.30 m and 2.5m respectively. While those of the second are respectively 0.18m and 3.5m. Plot the distribution of vertical stress intensity due to walls on a horizontal plane, 1m below ground level. The walls have negligible depth of foundation and are made of brick masonry (y = 19.2 kN/m cu)
How to calculate cement, water, fly ash amount for 1 cum if the w/c ratio is 0.4 and fly ash to cement ratio is 1:9
what is cement wastage percentage in NHAI ROAD WORKS
How to avoid fly ash seed ball formations in the concrete mixer while mixing of raw materials for fly ash block manufacturing?
how to calculate total cost for slab 35'×8'
how to find hardness of water?why it should be determined?
though u r a civil engineer, y r u interested in tcs???
Thumb rule for steel qty for 1m2 in kg/m2 column slab footing beam
