Interested to Buy Any Domain ? << Click Here >> for more details...
what are the advantages of PID controllers compared with
those of a PLC
- 2 Answers
- 6011 Views
- Bhel, I also Faced
- E-Mail Answers
Answer Posted / alok0207ac@gmail.com
The advantage of PID controller is its feasibility and easy to be implemented. The PID gains can be designed based upon the system parameters if they can be achieved or estimated precisely. Moreover, the PID gain can be designed just based on the system tracking error and treats the system to be "blackbox" if the system parameters are unknown. However, PID controller generally has to balance all three-gains impact to the whole system and may compromise the transient response, such as settling time, overshoots, oscillations. If the system parameters can not be precisely estimated or achieved, the designed PID gains may not resist the uncertainties and disturbances, and thus present low robustness. Even though the PID gains can be well-designed, the PID controller still has low robust ability compared with the robust controller when the system encounters to multiple challenges from the operating environment of the system, such as temperature, weather, power surge, and so on.
| Is This Answer Correct ? | 2 Yes | 0 No |
Post New Answer View All Answers
what are "R-condition"and "T-condition" in the designation of Steels ??
Define tons of refrigeration and cop.
What are the symptoms of broke piston ring?
What is control volume system?
Describe transfer machines?
which purpose use in air intake system
Define buckling factor?
While finding the velocity of gear B , in case of a simple epicyclic gear train, why do we take tke velocity of gear A to be ZERO(0)if the arm is rotated with speed equal to that of gear A and in opposite direction?
Why must we pay attention when we drain steam in steam turbine. What factors are observed?
what is procedure of measuring operating length of mechanical seal .(in case of centrifugal pump)?
My parents green card holder and sister is citizen so... . I m applying for spring 2010 for F1 visa... how can i convince visa officers for visa?
I am a mechanical student.And have cleared the written for NTPC. Please suggest what and how to prepare for the interview.i have got only 2-3 weeks in hand.
why does polytropic efficiency of a compressor decrease with increasing flow rate ?
what is procedure of measuring operating length of mechanical seal.(in case of centrifugel pump)
How much calorific value of heat is needed to heat 00c of
