Interested to Buy Any Domain ? << Click Here >> for more details...
What is the main difference between generator and alternator
- 4 Answers
- 5098 Views
- I also Faced
- E-Mail Answers
Answer Posted / afsar
Generator is machine which converts mechanical power in to electrical power.it gives output either dc or ac .alternator is a genetator but givs only ac power.
| Is This Answer Correct ? | 13 Yes | 1 No |
Post New Answer View All Answers
A commercial Building is designed with 14th floor levels with indoor substation of three phase transformer with rated capacity of 1000 Kva.The transformer delivered 65% of its rated capacity at 0.67 power factor lagging.Because of low power factor, the power customer was penalized and certain cost was charged accordingly based on every point percentage lower than 85%.This situation may repeatedly happen on the succeding energy bills of power customer.The power customer is desired to improve its historical power factor of 0.67 lagging and no further penalty be impose by the local power company on the next bill. Q: Identify the appropriate solution you want to offer to Client?.Justify SCIENTIFICALLY and MATHEMATICALLY the principles behind the solution.
condition Autotrip facia come on control panel of electrical transmission line?
Why HT 11 KV Slipring Motors are connected in star ?
In general bus riser follows the bus section in SWGR. What are impacts if bus section follows bus riser?
Mention what are the different colors on wires indicates?
When the relative speed between the magnetic fields of stator and rotor does is zero under steady state operation?
how are reversing the direction of dc motor
sir i want previous entrance exam papers for written test
Why do we require transformer with less specific weight if supply frequency is increased?
explain the types of drives
what is the difference b/w pvc cu conductor and cu breaded wire..?
what is a types of short circuit and what is a types of distance protection tests
11kv/433v delta/star distribution transformer primary side full load Ht current is 83.33A in , but input side VCB rating 800A.why?
1.what is the difference between transformer differential and busbar differential.2)why we are using 2 slope for trafo diif and 1 slope for busbar diff.3)what is the purpose of metrosil and stabilizing resistor in high impedance relay circuit.4)how metrosil reduce the peak volage.5)what is the funtion of stabilizing resistor
1. transformer design formula ? 2. how to calculate the primary turns and secondry turns ? 3. core types ? 4. how to find the primary current and secondry current ? 5. how to calculate the stacking factor ? 6. range of fulx density ?
