Interested to Buy Any Domain ? << Click Here >> for more details...
what is the difference between squirrel cage & slip ring
induction motor?
- 17 Answers
- 87426 Views
- College School Exams Tests, NTPC, Ramyaa Electro Gear, I also Faced
- E-Mail Answers
Answer Posted / waheed khan
Both have 3 a phase stator winding, the squirrel cage has a rotor with bars arranged around it's periphery, these bars are joined at both ends by a continuous ring. This forms a closed circuit of low resistance which is fixed. The wound rotor (slip ring motor) is similar in construction but the bars are replaced by copper windings, similar to those in the stator. They are star connected and the three ends are brought out to slip rings which allow an electrical connection to be made to the outside world. When no connection is made between these ends and the stator is energised, little current flows in the stator which does not turn, but when some resistance is inserted, current flows in the stator windings and the rotor rotates. As the rotor gains speed the resistance is taken out of circuit and the slip rings shorted together. The motor runs as a cage induction motor.
| Is This Answer Correct ? | 0 Yes | 0 No |
Post New Answer View All Answers
What is the best thing to protect the motor from running over full current. CT or O/L or pressure transducer at the given pressure rating
Why induction motor is widely used in industry
why do you add the load short circuit impedance when considering short circuit amperage. It seems that you should only consider supply. If you need to consider loads and you don't know what loads are to be added , what would be a good sub-transient reactance rating for the loads?
what is the safe meggar values for motor, transformer HT, LT and Cables? IF we want to replace I/C bay at our 220 kv substation which is of 140 mw load capacity bay to be replaced by 400 mw capacity bay.other than CT(1200/1) what are the other equipment i have to replace. why we generally use 3.5 core cable or in other word 1/2 core for neutral and also confirm me that in balance conditiob(3 phase)current in neutral will zero
what are the differences between 'exhaust fan', 'heavy-duty exhaust fan' & 'super heavy duty exhaust fan'. what are their power ratings ?
explain Density
how do i commission a distribution transformer knowing all its ratings and transformation ratios?d
electrical ques
LET ME NOW MORE ABOUT icu and ics for circuit breaker. how we calculate the rating of circuit breaker and i c u and ics values
do anyone out there know where to find a compleete list on acronyms/abbreviations used in offshore electric engineering. MCB - Micro Circuit Breaker, MCCB-Mouldes Case Circuit Breaker, ELCB-Earth Lekage Circuit Breaker, ELMCB- etc.....
A 3 phase transformer's (Y-Y) Y and B phase is (Y and B connection not broken) broken from neutral and R and Nutral connection is ok, what will be the relay tripping and why
I want to put this query to SENIOR & EXPERIENCED ELECTRICAL ENGINEERS. 1)I want to know about the control circuit diagrams for control panels. I found it difficult to understand. Is there ant booklet through which we can learn the circuit diagrams? 2)I want to learn about conduiting, laying cables, preparing cable schedules and various techniques which is the part of building infrastucture(construction field). I don't have any experience in this area. I have experience in control panels only. that's why i am not getting any opening in building infrastucture (construction field).Can I get the job in this field as Trainee Engineer? How to enter this field? I need job in PUNE
How generator NPS(NEGATIVE PHASE SEQUENCE TEST)TEST WAS DONE? PROCEDURE WITH DETAILS?
how can we select the appropriate VCB ?
How to select the earthing transformer,for DELTA TO DELTA TRANSFORMER OR ALTERNATOR SIDE.Pls post your answers and calculation.
