how to calculate quantities of sand , cement & aggregate in
1m3 - M20 , 1m2 of 6mm/12mm/20mm plaster , 1m3 20cm/ 1m2 of
10cm brick wall, paint quantity for 1m2 snowcem and lime
painting?
Answer Posted / padmarajan
M20 = 1:1.5:3
Volume = 1+1.5+3=5.5
Total volume ingredients for using =1.57
Volume of broken stone Require = (3/5.5) x 1.57 = 0.856 m3
Volume of sand Require = (1.5/5.5) x 1.57 = 0.471 m3
Volume of cement = (1/5.5) x 1.57 = 0.285 m3
= 0.285 x1440 = 411 kg.
For 1m3 of M20 (1:1.5:3)
Broken stone = 0.856 m3
Sand = 0.472 m3
Cement = 8.22 bag
Is This Answer Correct ? | 15 Yes | 3 No |
Post New Answer View All Answers
Special thing in designing a overhead reservoir ? which is different from an ordinary design
Gave a cantilever beam with 3 legs.Told to draw the bending moment diagrams, axial force diagrams and shear force diagrams.From BMD he asked to show how the reinforcement will be provided on the tension side.
what is cross hair cursor?
I want to know the relevant IS codes of practice which deals with different testings of cement-sand mortar (nominal mix)that is being normally used for brick work or plaster work in the construction work.
Prepare a Schedule for a Highrised building from starting stage to Handover?
What is command line?
What quantity of 1.0 m3 bricks required?
What is the difference between undo & redo?
How can calculate the requirement of steel bars of rcc slab for 1100 sq ft?
How many square meter can mason layout chb per hour
what pressure the NP2 class RCC pipe can sustain?
20 mpa what is the quantity of cement sand and aggregate in one cubic meter of pcc non rainforcement concreate kindly answer including formaula thanks
Calculate the maximum allowable speed on a horizontal curve of radius 350m if the maximum allowable values of the lateral coefficient of friction are 0.14 and the rate of superelevation is 0.08.
For the construction project what capital cost has to be taken in consideration?
what is density of 20mm coarse aggregate.plz send answer my below adress e.mail