Interested to Buy Any Domain ? << Click Here >> for more details...
Answer Posted / rajeebrout
for standard brick 380 to 420 mamimum.
| Is This Answer Correct ? | 0 Yes | 0 No |
Post New Answer View All Answers
A 16 pile group, consisting of diameter concrete piles, were cast in situ in a clayey soil whose unconfined compressive strength is 1100 psf. Each pile is 60 ft long and the pile spacing is 2.5 times the pile diameter.The water table is at the ground surface and saturated unit weight of the clay is 118 lb/cu.ft. using a factor of safety 3 and a reduction factor =0.45, compute the allowable capacity of the piles acting as individuals
what is the proper procedure in conducting a california bearing ratio penetration test on soil on cbr machine?
Why do you want to work here
factory shed foundation l=4, b=3' d=8' rcc foudation for top to bottom pl tell me cement ,steel ,sand ,labour cost ,excavtion,soil is weak not so hard
What the advantages and disadvantage of using 90mm and 100mm bricks for a wall of a house? Thanks for any input.
if dia of inner circle is 42 m and depth is 1.5 m and width is 1 m ,then whait is the quantity of steel?
Please tell me the quantity of cement, sand, flyash, foaming agent required for 1 cubic meter of cellular lightweight concrete blocks. also , is there any admixtures required for the CLC blocks production.
why are you joining in this (applied post) job and your aim for this job
what is density of 20mm coarse aggregate.plz send answer my below adress e.mail
what is w/c ratio in dry lean concrete for m10 mix design
what is relation between SPT N value and driving piles after conducting a soil test?
Define What is the meaning of a blue land surveyors flag?
How to calculate the cement consumption in RR Masonry in CM 1:8 for the foundation of Ground Level Reservoir
How to cal. The weight of hollow pipe?
what are the grades of concrete?where and or what purpose a particular grade is used in a particular structure?
