How many layers in 12mm and 18mm plywood?
- 6 Answers
- 19998 Views
- JMC Projects, L&T, I also Faced
- E-Mail Answers
Answer Posted / shreekantabehera2@gmail.c
12Mm 6 layer
18Mm 9 layer
| Is This Answer Correct ? | 0 Yes | 1 No |
Post New Answer View All Answers
Pls help me to arrive the rates for centering shuttering for highbay using H-frames?
Critical Path Method is...
in a corner footing of a building, column lies in one corner. in this condition i want to know if the reactive pressure of soil will be uniformly distributed throughout the footing or will be uniformly varying as in the case of eccentrical loading.
Can we weld hot rolled steel ASTM A615 ? Please Give the detail answer please thanks alot
a concrete mix 1 2 4 by volume with water cement ratio as .6 by weight if moisture content in F.A is 6% with 20% BULKING AND IN C.A 1.5% by volume. find quantities of different materials required for one bag of cement
a solid steel rod length 2m dia and 20mm vertically hangs from celling and has a collar firmly atteched to it. above the collar an annular rubber washer of 40mm th. having stifness k = 5n/mm is placed. determine maximum stress in the rod caused by mass of 5 kg falling through a height of 1.2m.
Hollow block masonry in cement mortar 1:4, 40×20×20cms in superstructure take 10sqm.I want calculation of brick sand
In Rcc ratio calculation I wanted to know quantity of Steel also.
What is the Roll of Water Bonding under VDF road?
What are the ingredients of pre-stressed concrete?
how to decide the mortar ratio 1:4,1:6 in masonry? same in plaster 1:3 and 1:4? which code or any document reference taken to define proportion?
What is componsation
Pls explain me about tension and compression in a flat slab
For a washout valve why are two gate valves required in normal practice?
Design a built-up column carrying an axial load of 1200 KN. Its length is 8m and it is effectively held in position at both ends and restrained against rotation at one end. Assume yield stress of 250 mpa
