Interested to Buy Any Domain ? << Click Here >> for more details...
what size of coarce aggregate we use for slab ,column,beam and footing?
- 3 Answers
- 12399 Views
- I also Faced
- E-Mail Answers
Answer Posted / tarique siddiqui
20MM and 10MM coarse agg. shuld be used
| Is This Answer Correct ? | 9 Yes | 0 No |
Post New Answer View All Answers
how to caliculate required amount of cement and sand required for 1cu.m.
why the cracks occurs in NP3 class Hume Pipe ? And what is bearing capacity of it?
in a corner footing of a building, column lies in one corner. in this condition i want to know if the reactive pressure of soil will be uniformly distributed throughout the footing or will be uniformly varying as in the case of eccentrical loading.
I just got a first job in Maharashtra and m a fresher. My task is estimate the cost of excavation of earth with J.C.B. can anyone tell me how to do this??
A 16 pile group, consisting of diameter concrete piles, were cast in situ in a clayey soil whose unconfined compressive strength is 1100 psf. Each pile is 60 ft long and the pile spacing is 2.5 times the pile diameter.The water table is at the ground surface and saturated unit weight of the clay is 118 lb/cu.ft. using a factor of safety 3 and a reduction factor =0.45, compute the allowable capacity of the piles acting as individuals
what is the calculation of raw material for 0.35cum of m-15
in staad pro. modelling for a parallel scissors chord truss, when i assigned roller support i.e fixwd but with all Fx, FZ, Mx, My and Mz release except Fy... the analysis results " in stability at a joint, with direction Mx or My..what could be the reason...anyone please explaing
how much cement is consumed by a stone masonry wall 17.7m long,0.55m wide and 1m high
what is Quantity of stone and sand required for one cubic meter of stone work (UCR)
What is semirigid connections?
difference between trapezoidal and pedestal footing and how the load acts on that
what is cross hair cursor?
How much 1 cum of M15, M20 & M25 concrete weigh?
what is the composition of good brick ?
std penetration resistance in very stiff clays lies bet 2 & 4 4 & 8 8 & 15 15 & 30
