Answer Posted / sudhakar
Mechanical energy convert to Electrical energy
| Is This Answer Correct ? | 1 Yes | 0 No |
Post New Answer View All Answers
state types of reflectors in illumination engg. ???????
How to check the thermocouple is correctly connected to cable for K type? (i,e positive pole is connected to non magnetic conductor and negative pole is connected to magnetic conductor)
What is Icu and Ics and what is difference b/w them. please tell me how to calculate a size of a copper bar for a system or a breaker... reply on... king.arish@gmail.com would be waiting for a logical answer.
how do you choose the cable size as per amps rating & the voltage drop for the same.
What is the difference between diode and a transistor in terms of the direction of current flow?
What will happen if i used 11KV earth ht kit to 11 KV / 11 KV cable termination?
what is the basic need of domestic loads 1- voltage 2- current
i have a 4 Mva transformer 34.5 kv / 480-277 v and i used 2 parallel 3200 amp bus duct for the secondary feeder using 3 ply of bus bar ( 3/8" x 5" ) as a common where the flexible link terminated and 6300 amps breaker for the main, the lower bus duct reaches 70 degrees and the upper bus duct reaches 55 degrees when i used thermal scanner. why the temperature is not balance when the load reaches 3600 amps.
What is signal flow graph?
how to estimate wiring ins roughing ins. and boxes
What is the effect on in Zone and out zone fault if Phase side CT is Vk/2<30 mA and Neutral side is CT is Vk/4<30 mA for Transformer REF protection
What is Fire Panel ? How it works ?
What are approaches to tackle sedimentation problem of reservoir?
Which power will flow first if we switch on a motor Active or Reactive? How?
wat is the current produced in a 5000v megger? when the positive and negetive terminals are touched on our body get s shock?
