Answer Posted / parag gupta

it is varries according to source but it can 1600-2100 kg/cum for all size of aggregate.

List out some of the common problems that architect have to tackle it?

1073

---

asubmerged weir is one in which the water level on the down stream side of the weir is just at the crest level below the crest level above the crest level at stamp elevation as water surface on upstream

1931

---

how to disign cuplock shuttering and it's matireal requirement snd any related web site

3021

---

How to calculate steel for beam slab and column

1848

---

What is the quantity of metal 1 & metal 2 to be used in 100 cft concrete?

3081

---

can any one give me sample question paper of BHEL at mdansari86@gmail.com as i m appearing for the same exam.

2150

---

A 16 pile group, consisting of diameter concrete piles, were cast in situ in a clayey soil whose unconfined compressive strength is 1100 psf. Each pile is 60 ft long and the pile spacing is 2.5 times the pile diameter.The water table is at the ground surface and saturated unit weight of the clay is 118 lb/cu.ft. using a factor of safety 3 and a reduction factor =0.45, compute the allowable capacity of the piles acting as individuals

2239

---

how to decide the mortar ratio 1:4,1:6 in masonry? same in plaster 1:3 and 1:4? which code or any document reference taken to define proportion?

2127

---

how to calculate valuation for the old building?

2395

---

What is the mix propotion of M10,M15,M20,M25,M30,M40,M50.M60 cement content,aggrigate,sand and water ratio.

4687

---

WAP to print 1) 1 1 1 1 1 1 1 1 1 1 2) 1 2 3 4 5 6 7 8 9 10

2693

---

how to identify the failure of building by expansive soils

1649

---

What is absolute pressure? How absolute pressure is calculated?

1131

---

Hi all, please guide me about the volume. And percentage. Of steel fibre to be used. My project. Is Sifcon.

2227

---

density of crush sand & crush stone or grit powder

6791

---