Interested to Buy Any Domain ? << Click Here >> for more details...
Name some of the common protocol use in automation.
- 3 Answers
- 6377 Views
- Empower, I also Faced
- E-Mail Answers
Answer Posted / afsar mumtaz
1-profibus (process field bus )PA and DP
2-FF
3-profinet
4-MOD bus
5-HART
6-ethernet
7-smart link
| Is This Answer Correct ? | 0 Yes | 0 No |
Post New Answer View All Answers
Explain why use mmwc unit?
what is controlling card in dcs? how u measure dcs memory?what is bus in dcs?how u know dcs speed n ehternet speed?
What is Cavitation in a control valve?
explain key exchanges in all security modes WPA,WPA2,TLS?
How many interlocks at turbine? Plz explain briefly
State four different types of flow measurement, for gas flow measurement MMSCFD is the common unit expand the unit and specify significance of word S in the unit.
can you send remote seal interface level transmitter calculation steps for oil water saperator.
hi i am eswar i want to know the instrumentation interview questations for eil(engineers india ltd) i have applied for engineer post in eil please help in this.my mail id eswar310@gmail.com
Explain the mechanism behind the turbine meter.
how many type of plug are used in pneumatic control valve,name them.
in which principle pressure tx,level tx ,flow tx,temp tx ,control valve works?
when placing a vent or drain hole on an orifice plate should you measure from the center of the bore up or down for the vent placement?
I am using 971 Enraf radar level transmitter for LPG tanks ,the tank side indicator gives the error code 999999999FL can any body give me any diagnostic for this issue?
If a warning lamp will operate with the ground circuit is bypassed with a jumper wire to ground, what should you check?
A valve in series with an orifice plate (DP transmitter), is aligned for constant pressure in the pipeline, if there is an error dx, How to align it in process.
