Interested to Buy Any Domain ? << Click Here >> for more details...
6.6Kv feeder feeding tow step down transformers-415V-,what
the possible consideration for parrellel operation?
- 1 Answers
- 3322 Views
- I also Faced
- E-Mail Answers
Post New Answer View All Answers
working function importance of mdc meter
1.What will be stored in online ups EPROM IC?
given data are load current & power factor cable core size? plz any one update the calculation formula
Where is servomechanism used?
We are preparing another project which involves Waste heat recovery from a 1 MW GE Engine. The Engine in particular gives out flue gas at 487Deg C with a flow rate of 5650 kg/hour and this can be cooled to 180 Deg C. This gives a thermal output of ~ 594 KW that is available for input to VAM via heat exchanger / boiler. Additionally 581 KW will be available from engine jacket water (temperature profile 80/ 80 Deg C and a flow rate of 50m3/hr) Our estimation is that 300 TR of cooling is possible with a suitable VAM machine(s). Please advise what is the most suitable arrangement with maximum TR and min Capital expenditure. plz reply me as early as possible
A double circuit with dog conductor 66KV Transmission line from wind farm evacuation to feeding substation having capacity of 25MW for transmission. Can same transmission network be considered for further expansion of Power & how much in MW. If we need to expand next 10-15 MW more will there any augmentation is required in transmission network? Kindly reply asap.
We have drive feeding an output contactor for a 5000 hp motor @ 5kV application. The motor FLA is 629amps x 1.25% service factor = 786.25 amps The cable that we current have in place between the drive and the output contactor is 350kcmil- MV-105 (parallel cables). Per the NEC table 310.60 (C) (69). This show the cable ampacity is at 615 amps per cable for a rating of 1230 amps. We have derated the cable for the cable tray and the multiple cables application and our calculations show that after the correction factor factor we are at 922amps. 1230 amps x .75% correction factor factor = 922.5 amps. The customer is driving us to then use another safety factor of .25% off of the already derated cable. Can you please provide a longhand calculation for your solution on this application?
we have 15 ampere variyac but we want 30 ampere variyac what we do
Explain the working principle of Synchronous Generator and Assynchronous generator?
What is knee point voltage?
Sir, I m 3rd year student 4m DCE and want to do internship in siemens or l&t or any other mnc related to electrical engineering. please tell me the procedure 4 same and oblige me
why it is so called as xlpe(cross linked poly ethyline) cable?
WHAT IS SPEC OF CLEANROOM MOTOR AND LIGHT FITTINGS?
Is it true online ups having bypass mode if it is true then why we called ups because it is interrupting power when goes in bypass mode
How does an induction motor start?
