Interested to Buy Any Domain ? << Click Here >> for more details...
Answer Posted / manan2347
First calculate power consumption of motor.
P=√3*E*I*cosФ (assuming 3 phase motor)
now power consumption per day
P(kWh/day) = P(W) × t(h/day) / 1000(W/kW)
*conditions apply :D
| Is This Answer Correct ? | 0 Yes | 0 No |
Post New Answer View All Answers
why do you add the load short circuit impedance when considering short circuit amperage. It seems that you should only consider supply. If you need to consider loads and you don't know what loads are to be added , what would be a good sub-transient reactance rating for the loads?
We have drive feeding an output contactor for a 5000 hp motor @ 5kV application. The motor FLA is 629amps x 1.25% service factor = 786.25 amps The cable that we current have in place between the drive and the output contactor is 350kcmil- MV-105 (parallel cables). Per the NEC table 310.60 (C) (69). This show the cable ampacity is at 615 amps per cable for a rating of 1230 amps. We have derated the cable for the cable tray and the multiple cables application and our calculations show that after the correction factor factor we are at 922amps. 1230 amps x .75% correction factor factor = 922.5 amps. The customer is driving us to then use another safety factor of .25% off of the already derated cable. Can you please provide a longhand calculation for your solution on this application?
High speed earth switch operation with diagram
if we run a 3 phase machine on two phase what will happend??? given answer with solid reason please
how to calculate the power factor when instantaneous voltage and current has harmonics in it ?
What is Bolted fault?
what is consequences of neutral and earth connect?
There is any especial requirement for motor to drive through with VFD?
if we have a industrial load of 400 kilowatts with 415 volt AC then how much total harmonic distortion (thd%) should be acceptable for steady power system.
what is difference between 2 pole structure and 4 pole structure in transformer yard
Why back emf used for a dc motor? Highlight its significance.
Why does increasing the magnetic flux in the main field of a d.c motor cause the armature current to reduce??
what happend to DC shunt motor if its field winding insulation becomes slightly weak? will that motor can run on full load or not explain in detail. thanks
What are root loci?
what is difference between 9kv 5ka surge arrester and 9kv 10ka surge arrester.
