Interested to Buy Any Domain ? << Click Here >> for more details...
What is vector group? What is meant by DYN11?Why is it needed?
- 13 Answers
- 86076 Views
- Areva, Bhel, BRG, Escorts, Fortis, I also Faced
- E-Mail Answers
Answer Posted / fernando garcia
This is a very controversial topic. I guess many of the
above answers forgot that when it comes to vector groups
the rotation of the Clock is Anti clockwise. First off, you
can never write all the letters in capital letter DYN11.
Always use the Capital to refer to the HV and the lower
case to refer to LV. Secondly, if u have Dyn11 just 11 by
30 degrees i.e. 330 deg. However. 330 deg is equivalent to -
30 deg. ''Cosine of 330=cosine of -30''. Bear in mind that
the HV is always the reference vector, which means HV is
always at 0 deg. So, imagine the Clock is rotating anti
clockwise. You would see that the 11 always comes first
than the 0. The eleven is the LV and the 0 is the HV. In
Conclusion, Dyn11 means that LV leads HV by 30 Degrees
because the displacement among them is -30 degrees.
| Is This Answer Correct ? | 13 Yes | 4 No |
Post New Answer View All Answers
what is mean by ideal infinite bus? why it is required to consider in fault short circuit calculations?
what is the carona effects meaning in HT line transmmission system
what is errection pcbs?
what is a speed of rotor when we give supply to stator of 50hz and as well as rotor of 60hz of an induction motor?????
Explain the purpose of inductor in an electric circuit?
i have a 1500kVA transformer what is the kWH meter i need to use?
I am getting above 60 V as open delta voltage against single phase unit ICT at tertiary delta formed and ICT getting trippped on NDR. ICT tested and found in order. PTs provided on tertiary are tested and in order. what may be the reason?
what is meant by IGBT how they differ from tyristor ?
Write a note on Treatment for electric shock.
what kvrah y we need to take the readind of that
if i get a drop in my 1st year and the i clear my 2nd year and 3rd year all clear and i dont have any back logs so can i be able to sit in campus selection??
how to test the turn ratio of 3 phase transformer using volt meter shoe the curcit diagram.
I have an existing old MCCB. ABB Model SACE, the rating are: Ue = 660 volts, Iu =1250 Amps, 3 poles, Ith (max) =800 amps at 45 deg C. I need a circuit breaker for my 3 phase motors, 380 volts 60 hz. the supplier required the minimum ampacity of the breaker to be 911 amps. can i use this breaker with rating of Iu =1250 amps but Ith = 800amps maximum?
In a flange coupling, the flange bolts are designed for
Phase control and integral control are used for?
