Interested to Buy Any Domain ? << Click Here >> for more details...
what is the difference between line & phase current in star delta connection motor?
- 2 Answers
- 5212 Views
- I also Faced
- E-Mail Answers
Answer Posted / ald
Star connection--- Line current = phase current
Line voltage = phase voltage x 1.732
Delta connection --- Line voltage = Phase voltage
Line current = phase current x 1.732
| Is This Answer Correct ? | 2 Yes | 0 No |
Post New Answer View All Answers
What is oscillator circuit?
what is through fault?
what is the advantage of connecting capacitors in delta than in star?
how to synchronize 3 phase slip ring induction motors of different ratings.
Sir,In our company there are 3 caterpillar make(capacity:(1) 3.3KV,2.5MW(2)3.3KV,2.5MW & (3)3.3KV,1.9MW) & 1 deutz make (capacity:11KV,3.8MW)gas engines utilised,all are running in paralell. There are three transformer utilised,(1) 6.25MVA,3.3KV/22KV,Impedence voltage:6.7% used for two generator,both are 2.5MW(2)5.5MVA,3.3KV/22KV,Impedence voltage:7.2% used for one generator of 2.5MW & (3) 5.5MVA,11KV/22KV,Impedence voltage:7.8% used for one generator of 2.5MW.all generator breakers capacity of 1250Amps. Sir,I want the details of fault level calculation of generator,transformer individually & for whole system. If you require any information from me.feel free for contact me sir.pl.send the answer of my question as the earliest as possible.
how to calculate the size of the HT cable
given data are load current & power factor cable core size? plz any one update the calculation formula
Efficient electrical earthing in hard rock area
What is Annunciation?
During Testing of Maintenance Free Earthing, How deep should be the Spikes of Earth Test Meter should be inserted in the soil(one spike is 15 Meter & Other spike is 30 Mtrs away from the Main Earth Electrode. Because, recently, we observed that when spike is inserted 3-4 Inch in the earth- results are better, If spike is inserted 1 feet deep than results are increasing.
11kV capacitor bank of rating 2.4KVAR, is charged with protective relays of only over current & Earth fault &.......without Over Voltage, Under Voltage & Neutral Displacement Relay. Is it advisable??
any body,pls tell me how to done relay coordination ? how to coordinate by TCC curve?how to read the tcc curve?
What are the three constants associated with a steady state error?
We have drive feeding an output contactor for a 5000 hp motor @ 5kV application. The motor FLA is 629amps x 1.25% service factor = 786.25 amps The cable that we current have in place between the drive and the output contactor is 350kcmil- MV-105 (parallel cables). Per the NEC table 310.60 (C) (69). This show the cable ampacity is at 615 amps per cable for a rating of 1230 amps. We have derated the cable for the cable tray and the multiple cables application and our calculations show that after the correction factor factor we are at 922amps. 1230 amps x .75% correction factor factor = 922.5 amps. The customer is driving us to then use another safety factor of .25% off of the already derated cable. Can you please provide a longhand calculation for your solution on this application?
How the frame size of a flange mounted AC induction motor is calculated?
