How we can calculate the quantity of sand, & cement, & also
aggregate for a slab.
Length 25'/3.28 = 7.62 Mtr
width 20'/3.28 = 6.09 Mtr
depth 6" /3.28 = 0.152 Mtr
Answer Posted / selvam.m
First off thank to all ans poster.
Qty Of the Slab is = 7.62X6.09x0.152
= 7.054 Cum
Assume we providing the M20-Concrete on this slab.
Cement:
cement = 7.054*300 = 2116.1kg
or
Cement + Fly ash = 7.054*270 + 7.054*56 = 1904.5 kg cement,395kg fly ash.
Sand:
Sand = 7.054*120*6 = 5078.88 kg.
Aggregate:
20mm= 7.054*126*6 = 5332.824 kg.
12.5mm = 7.054*6 = 3216.624 kg.
Note:
M20-concrete
1Bag - Cement
120kg - sand
126kg - 20mm Agg
76kg - 12.5mm Agg
water - 25 ltr
| Is This Answer Correct ? | 0 Yes | 0 No |
Post New Answer View All Answers
manhole height is 1500 mm and width of brickwork is 230 mm dia of manhole covering is 560 mm brick masonry 1:4 horizontal length is 1500 mm and plaster 12 mm thick on both side 1:3. how to estimate the quantity of brickwork with mortar cement and sand for manhole chamber.
What are the main reasons for conducting pull-out tests for soil nails?
in 2 way slab can additional compressive reinforcement can be provided if yes than in which conditions it is required ?
What is c.g.i sheet which used for roof??
what is pqc
to minimize budget cost of building , what can i do
Will going from a 3-tap to 6-tap increase water pressure?
What is the maximum crushing load in Kg & crushing strength in N/mm2 for M25 & M 15 Grade concrete
what should be the PCC ratio to construct a plinth of (40x40x4)ft...??also its estimated cost??
HOW MANY BAGS OF CEMEMT USED IN PER M2 OF PARTITION WALL
What is oneside mat. And explain
Explain what is the release of lien?
where tie beam is used? what is the pupose? what dimension of tie beam can provided and number and diameter of steel bars to be used between the columns of 1333mm and 1400.
What is the minimum size of the particles of silt soil?
how to stop beam concrete between column