Interested to Buy Any Domain ? << Click Here >> for more details...
Answer Posted / ernest parku
Star is to reduced the high starting torque of the motor or the high surge current to a full load of delta connection.
| Is This Answer Correct ? | 5 Yes | 3 No |
Post New Answer View All Answers
what is your majour contributions in your present job
What are the limitations of Kirchoff's laws?
What is ideal IR values for ground and neutral.
We are preparing another project which involves Waste heat recovery from a 1 MW GE Engine. The Engine in particular gives out flue gas at 487Deg C with a flow rate of 5650 kg/hour and this can be cooled to 180 Deg C. This gives a thermal output of ~ 594 KW that is available for input to VAM via heat exchanger / boiler. Additionally 581 KW will be available from engine jacket water (temperature profile 80/ 80 Deg C and a flow rate of 50m3/hr) Our estimation is that 300 TR of cooling is possible with a suitable VAM machine(s). Please advise what is the most suitable arrangement with maximum TR and min Capital expenditure. plz reply me as early as possible
What is the tension required for the 25000 CFM AHU belt
Why it is possible to use PWM with a STATCOM and not with a conventional TCR based SVC
1) why a dg set shows variation of power factor and load when synchronised with other dgs? 2)Why the load sharing is not become equal in all dgs?. 3)When a dg set will not run on auto start?
What is mean by spike arrester(Voltage Operated)
A 100 kVA , 400 v/250 kv testing transformer has 8% leakage reactance and resistance on 100 KVA base . A cable has to be tested at 500 kv using the above transformer as a resonant transformer at 50 hz . if the charging current of the cable at 500 kv is 0.4 A find the series inductance required . Assume 2% resistance for the inductor to be used and the connecting leads . Neglect dielectric loss of hte cable . what will be the input voltage to the transformer ?
How Can I calculate for the photometrics requirements for a street lighting? Data given are: 45 units of 6 meter light pole with 150 watts metal halide lamp, 220 volts and installed in a promenade area.
what is the min and max ohmic resistance for the earthing rod installed for lighting poles for street light network
What the difference between ac and dc inductor an capacitor
why the carbon brushes are broken in srim while the motor runningtime
Distribution transformer we provided 2 separate earthing pit for Body and 2 separate earthing pit for neutral,we can not connect separate body earthing pit to other earthing pit but we do metal glanding in secondary side cable termination in both side, transformer and PCC panel (LT Panel), is this safe for transformer and other equipment?
what is the necessary of using inductance property in transmission lines even through resistance is used to opposes the high current flows in that?????
