what is the different ratings of ACB/VCB/SF6 which is used
at HT side
Answer Posted / skmatloob.s
Electrical Question
Is This Answer Correct ? | 1 Yes | 0 No |
Post New Answer View All Answers
if there are six generators (3 gas CATT, one Jenbacher o1 MW each, and two nos Diesel 01 no 01 mw other 0.65mw EDGs ( say), 3 CAtt gas set have identical pole pitch,01mw EDG and Jenbacher gas Set have different pole pitch, how their power connection can be done to connect a common bus bar during installation. in short, how different pole pitched generators power connection can be done to connect a common busbar system through generators incomer ACBs.
HOW TO CALCULATE CAPACITOR BANK OR HARMONIC FILTER CALCULATION
What are the difference between CT/PT operated Meter and RRAMR Meter for HT/LT application?
What is open delta Xformer? It's adavntages & Use?
why effective resistance should be more than static resistance in transmission line?
What is the most essential condition for the voltage build up for a d.c. Shunt generator?
How much depth n width required for laying of 1X70 Sqmm Cable in Desert???
solor panels arrange some angle,panel is flat fitted energy was produced or not why?
dg earth connect only in the amf panel or not why
what is ATS & RING MAIN UNIT in Distribution System?And its Function.
what is formula for zero phase sequence of nuetal earthing transformer of 6.6 kv
why the earth is taken minimum in supplying? wather it the proportional factor to getting work any equipment or a power plant?
What is installed in PAC that is control the humidity
we have require a Motor (1500kW, 6.6kV, 50Hz) which shall operate at 1500rpm during 30min and after it shall run on 500rpm during 15min. The same cycle shall be repetitive during the whole working days. Which method is best and economic to achieve such type of task. VFD, VVFD, Pole changing motor etc.
how to differentiate a mpcb,mcb with a contactor? Explain their working operation