Interested to Buy Any Domain ? << Click Here >> for more details...
Answer Posted / vibhuti
456-2000
| Is This Answer Correct ? | 1 Yes | 1 No |
Post New Answer View All Answers
What is thumb rule for deep trench excavation
what is c4x light weight cement blocks
trapozidal
how we calculate the grade of the Bituminous materials.?????
What are the composition of a landfill?
Explain what is the release of lien?
With reference to construction of state highways, please let me know the total Bill Of Quantities as per the following details:- 1) Subgrade - 500 mm 2) Granular Sub-Base (GSB) - 200 mm 3) Wet Mix Macadam I (WMM I) - 150 mm 4) Wet Mix Macadam II (WMM II) - 100 mm 5) Dense Bituminous Macadam (DBM) - 60 mm 6) Bituminous Crust (BC) - 40 mm Road Length is 44 Kms. Road Width is 7 mtrs. Please provide the BOQ of each layer as per Compacted Factor & Loose Factor both. Also, if possible please provide me the approximate details of total material required (all categories viz. soil, gravel, stone aggregrate, sand, bitumen etc.) as per general mix design prevailing in India. Thanks & Regards -- Rokr
may i know the detailed description of cutting length
what is the difference b/w full length and cutting length?
What is the basic difference between OPC
how do i remedy a foundatiom that the column bases was cast and aftet 28days crushing the conprehensive strength of the concrete fall below the specification 25N/mm2
A 16 pile group, consisting of diameter concrete piles, were cast in situ in a clayey soil whose unconfined compressive strength is 1100 psf. Each pile is 60 ft long and the pile spacing is 2.5 times the pile diameter.The water table is at the ground surface and saturated unit weight of the clay is 118 lb/cu.ft. using a factor of safety 3 and a reduction factor =0.45, compute the allowable capacity of the piles acting as individuals
How much does the leaning tower of pisa lean?
how we can find sieve #4 is 4.75mm?
at what pressure ply-wood is obtained by gluing wooden sheets
