Interested to Buy Any Domain ? << Click Here >> for more details...
Answer Posted / saquib hassan
ofcourse that would be 100 mm.
| Is This Answer Correct ? | 29 Yes | 4 No |
Post New Answer View All Answers
plz drive the formula d2/162.162 for the calculation of weight of steel bars????
How good are the Weinerberger Porotherm bricks that are being used in construction in Chennai, India. Its being used in non load bearing walls and has a compressive strength greater that 35 kg/cm^2 and a density of approx.694 - 783 kg/m3.
manhole chamber having height of 2300 mm and thickness of brickwork is 230 mm and dia of opening covering is 560 mm and bottom length vertical is 1500 mm (1:4) brick masonry and plaster 12 mm on both sides..how to estimate the no bricks used with mortar cement bags and sand for total chamber including plaster.
five benefits of using standard terminology in the measurement process
What is the cost difference between site mix and ready mix concrete per cubic meter
What is the value of live load that should be incorporated in design of locker room and cash vault room while designing a building for commercial bank?
where tie beam is used? what is the pupose? what dimension of tie beam can provided and number and diameter of steel bars to be used between the columns of 1333mm and 1400.
What is the mix propotion of M10,M15,M20,M25,M30,M40,M50.M60 cement content,aggrigate,sand and water ratio.
what is the cost of rcc roof casting of 400 sq. ft. in kolkata
what is pile and deam foundation
How much of the strength of concrete comes from post- production curing?
How much area, in square meters, will one liter of paint cover if it is brushed out to uniform thickness of 100 microns?
why is M30 grade Concrete use for Foothing & Column M50
What is meant by dimensioning?
04. a. Slenderness ratio…………… 1 b. If the height of a stage is 15-0 & dia. of the prop is 5, the slenderness ratio is….… 1 c. If the height of a stage is 10-0 & dia of prop is 3, the number of bracing will be…… 1
