Interested to Buy Any Domain ? << Click Here >> for more details...
What is difference between ON delay and OFF Delay Timer?
- 7 Answers
- 53829 Views
- I also Faced
- E-Mail Answers
Answer Posted / kj
ON delay timer - after the input is turned on there is a
delay before the output is turned on.
OFF delay timer - after the input is turned off there is a
delay before the output is turned off.
| Is This Answer Correct ? | 64 Yes | 21 No |
Post New Answer View All Answers
What is lighting kitts.
what is the effect of higher value of GD???
What is depreciation factor?
In Electrical 'Single Line Diagram' cable nomenclature shows "2 X 1C X 630sq.mm to be provided for one incomer. The question is how many cable to be proved for one Incomer.
Define resonant frequency?
What is the meaning of 40X8X2 busbar dimensions for carring load of 400 Amps
How to calculate the electrical load for a standard telecom BTS shelter and choose the DG set capacity for the same load?
what is the effect of change in supply frequency on load angle of synchronous motor,all other parameters remaining same?
What is difference is of VSD,VFD,VSDS, are they the same as the direct current to control dc using above mention
how much LT load can bear by the 100 KW HT connection.
How to measure the Harmonic Distortion of UPS ie THD?
how does the thyistor work in dc drive?
A 500 V shunt motor runs at its normal speed of 250rpm when the armature current is 200A. The resistance of the armature is 0.12 Ω. Calculate the speed when a resistance is inserted in the field reducing the shunt field to 80% of normal value and the armature current is 100A.
A 15 kw squirrel cage motor having a maximum efficiency of 90% on a continuous full load has temperature rise of 42 degrees celcius after 30 min and 52 degrees celcius after 1 hr under the above operation conditions. a) calculate its final steady state temperature rise on continuous load and the heating time constatnt. b) if the motor is operated on a short load for 9 min estimate its temperature rise. c) calculate the maximum overload that can be applied on a short, 9 min rating so that the temperature rise is the same as the final steady state temperature rise on continuous load.
How much voltage we need to apply in 33kv cable during hipot test of cable
