Interested to Buy Any Domain ? << Click Here >> for more details...
Answer Posted / shiva.sh
Actually Resistance is universally proportional to cross section area of the conductor it means when conducting materiel is thick the resistance will decrease then leakage current flow easily
when we inserting the plug in to the socket first
big pin i.e. first earthed, if there is any leakage of
current may also be we are safe or otherwise we under goes
to electric shock.
| Is This Answer Correct ? | 2 Yes | 1 No |
Post New Answer View All Answers
I want formula to calculate current loss with distance in km.I searched many sites but didn't right answer.Plz reply me
During FEED, you will have all the information with regards to cable. How will you calculate the MTO for MV and LV Cables? what are your considerations?
what do u understand about FACTS? how they are useful?
what is the safe meggar values for motor, transformer HT, LT and Cables? IF we want to replace I/C bay at our 220 kv substation which is of 140 mw load capacity bay to be replaced by 400 mw capacity bay.other than CT(1200/1) what are the other equipment i have to replace. why we generally use 3.5 core cable or in other word 1/2 core for neutral and also confirm me that in balance conditiob(3 phase)current in neutral will zero
How we can defined theecopper cable size if we know the aluminium cable size?
why output is out of phase in case of common emitter?
if flux and load static in dc motor and supply voltage increases 20% then what happened in speed
I am having a 1500 KVA transformer whose secondary current is 2086A and my connected load is 1000 KVA, I am having 400 KVAR APFCR for PF improvement what ratio of CT should i install in LT EB Bus to get optimum PF improvement?
in control scheme dc logic wiring commonly using negative loop,what is the reason?if we use positive looping what will happen?
what is the diference between the 4pole & 6pole DC Motors & what is advantage 6pole over the 4pole ?
What is The Resistance Formula
what is the sludge current
i have some screw comprressor with 630kw power,i have established them with simple star to delta circuit,by the way there is so much inertia when the screw comprressors start, can you offer me contactors power with 400vac or any cataluge to choose the contactors
two phases with neutral supply can be taken in 3C X 10 sq.mm cable .
is there any lightning by passer is arranged in ship like buildings?
