Interested to Buy Any Domain ? << Click Here >> for more details...
when conductor rotates
in varying magnetic
field the emf will
induced in it and it is
sinusoidal in nature ...?
Why it is not in square
wave and rectangular
wave in nature?
- 4 Answers
- 5738 Views
- I also Faced
- E-Mail Answers
Answer Posted / @vi
Because varying magnetic field is produced using
alternating current which is sinusoidal in nature. So when
the conductor moves through these sinusoidal magnetic flux,
sinusoidal voltage induces in it.
| Is This Answer Correct ? | 0 Yes | 0 No |
Post New Answer View All Answers
how can i apilly for electrical c licencese.sir,i completed B.Tech in electrical & electronics engineering in 201onot working any company
During Testing of Maintenance Free Earthing, How deep should be the Spikes of Earth Test Meter should be inserted in the soil(one spike is 15 Meter & Other spike is 30 Mtrs away from the Main Earth Electrode. Because, recently, we observed that when spike is inserted 3-4 Inch in the earth- results are better, If spike is inserted 1 feet deep than results are increasing.
Draw a SLD for main panel for school having connected load of 1200kw and emergency generator 200kw.also show the increase of additional load of chiller 225kw in the lv panel indicating meter postion size of transformer ,cables and capacitor bank.
with 3 phase board on a 63 amp rcd is it ok to have 6 electrical showers 2 on each phase and what problems could happen
plz tel me syllabus and exam date 4 jr executive engg (electrical)
standard earthing rating for power line..
which mm cable should be used for 1.hp immersible pump motor for the distance of 330 metres?
Define norton equivalent circuit?
where we use the SFU & FSU?
before synchronizing an alternator,power factor is leading ,why?
How many types of protection relays are there based on the characteristic?
how current is reverse from its normal direction during the fault?
What is warm / cold start of HT motors. How many warm start & cold start are possible in a day?
I WANT TO know WHICH WAY IS BETTER FOR CONNECTION BETWEEN POWER TRANSFORMER AND MAIN DISTRIBUTION PANEL. 1-IS BETTER WE USE CABLE? 2-IS BETTER WE USE BUS DUCT? my transformer rate power is 2500KVA
In all analog voltmeters or ammeter showing some small size symbols. as well as a star and in star 2no. digit, resister symbol,and other. what is that's meaning ?
